00101 Posted May 15, 2013 Report Posted May 15, 2013 Im looking for a table saw upgrade and have been browsing CL and found this: For $20 for both. It's about 45 minutes one way to go and get it. I'm currently using a ~$200 craftsman contractor saw, so finding something better isn't exactly going to be a challenge. Unfortunately there aren't any details on this, so I'm hoping someone here might be able to recognize the style or make and offer some insight. Quote
00101 Posted May 15, 2013 Author Report Posted May 15, 2013 Also looking at this homecraft, its $100 in town, but the amount of rust is slightly concerning, especially in the corner. It has a 10" blade and a 3/4 rated horsepower motor (but based on the electrical ratings its closer to 1.8Hp). I don't have a model number on it, but the serial is z2940 made by the 'Delta power tool division of Rockwell manufacturing' in Milwaukee Wisconsin, if that helps place or identify it. Quote
TRBaker Posted May 15, 2013 Report Posted May 15, 2013 00101, that second saw looks like a Delta Contractors Saw and with a 3/4 hp motor is NOT going to do the job for you. Considering the shape of the machine, I'd say it has seen very little maintenance over the years and it certainly isn't worth $100. I would hold out for something better, if I were you. Quote
knotscott Posted May 15, 2013 Report Posted May 15, 2013 If the motor runs, it's worth $20, but it's pretty small and won't have much of a fence. I doubt it's better than a full size Cman contractor saw....do you by any chance have a benchtop or portable jobsite saw with a universal motor as opposed to a cast iron contractor saw with a belt drive induction motor? Quote
duckkisser Posted May 15, 2013 Report Posted May 15, 2013 not much table top and the motor is under power like trbaker said. plus it will need a lot of work to get up to snuff. it might be worth it if you need a motor and take the rest to the junk yard for scrap dollars. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.