WelshWood Posted May 26, 2013 Report Posted May 26, 2013 Been meaning to join this great forum for some time but have decided to ask for some advice from you guys about power tools! Been in the trade for around 5 years now and gathered all the tools needed to get a multitude of jobs done, however, now that work is picking up i'm upgrading on the tools that are somewhat 'lacking' in my eyes.. Mitre Saw, 1/4 & 1/2 routers, 1st & 2nd Fix guns (1st fix was unfortunately smashed to smithereens when it fell from a roof!!!) and a plunge saw are the tools that I'm looking to purchase now.. Obviously there will be people who love festool/makita/bosch etc and will never move from their trusted manufacturers, so i'm looking for your reviews, mainly for site use. Been thinking about the festool kapex saw as my mitre saw and the appeal of using guide rails for plunge saw/routers and the addition of the vacuum system is drawing me away from my 'bosch' frame of mind and towards the more expensive green side... Hoping this isn't too drawn out.. but what would you guys suggest to me? Many Thanks! ~WW Quote
RJsumthn Posted May 26, 2013 Report Posted May 26, 2013 It seems like the Festool line would be a good fit for you with the track saw, Kapex, and router. By Fix guns are you talking about air nailers? If so the Porter Cable line is pretty solid. Quote
PaulMarcel Posted May 26, 2013 Report Posted May 26, 2013 I talk regularly with about 10 tradesmen in the UK; all of them do primarily what we call built-ins on-site. All of them use Festools on-site because of how everything works together and especially the dust-collection. One is moving from less of a joiner role to that of a furniture builder and has sold off his larger tools and replaced them with a CMS unit with three plates. Granted I met these guys because of Festool trade events so keep that in mind. Quote
pghmyn Posted May 26, 2013 Report Posted May 26, 2013 I've only used the Festool TS55 track saw, so I can't compare to other brands. But I can tell you that I love it. If that helps at all. When I get a router, it will be their OF1400 for dust collection and ability to use the rail. I'm not a brand specific person, I just know what I like. And the Festools that I have, I would never give them up. Quote
TRBaker Posted May 27, 2013 Report Posted May 27, 2013 I've used about all of the nail guns out there and I think Hitachi is my favorite framing nailer, Senco for finish nails and brads, and Grex for the micropins. The only stapler I've ever used was Bostich and it's passable. Quote
WelshWood Posted May 27, 2013 Author Report Posted May 27, 2013 Thanks all for your posts; from the general census I can see that festool is an outright winner with most people.. I recently did a fireplace surround for a client and used 2000w dewalt router borrowed from a friend to do the job.. It did the task pretty well but to me.. something wasn't feeling right.. and with the festool range that I have used so far at demo days I feel like the ergonomical benefits they bring to work are irreplaceable, so I'm sure my 1/2 router will be from their line of routers. I learnt my trade from an old school carpenter who praised hand tools over any electrical counterparts, (in my eyes the best way to learn). However, after using a router to do hinges and other small jobs on site I cannot see why anyone would want to chisel a hinge housing... My question here is what router would you recommend solely for this purpose? Something powerful and lightweight is critical here for obvious reasons. Would love some more reviews from an on site carpenter about the kapex saw but i'm sure most would recommend.. TRBaker.. what you have shared about the hitachi nailers has somewhat suprised me.. the only hitachi kit I own is 2 grinders.. I didn't rate the drills and I certainly didn't rate the circular saws! Would you say paslode are over-rated? Many thanks, ~WW Quote
TRBaker Posted May 27, 2013 Report Posted May 27, 2013 WW, I like to use a small trim router for hinge mortises. I've got a PortaCable and a Bosch. I prefer the PC for routing out the hinges and strike plates. They are also great for routing small coves, round-overs, and beads. I like the Hitachi nailer because it's so much lighter than the others. The Paslode gas nailer is a royal pain in the ah......neck, but there are times when they are worth their weight in gold. The Paslode air nailer is one of the heaviest guns I've used, except for a thirty year old Senco framing nailer/anvil. Quote
Tpt life Posted May 27, 2013 Report Posted May 27, 2013 For framing I used Hitachi, Senco, and Paslode (air and butane) stick guns and prefer the Paslode to Hitachi for weight reasons only. (Paslode butane are only worth money if you cannot get air or only shoot nails three at a time.) All three air guns seemed to function just as well. For sheathing or coil framing or roofing Bostitch seems to rule the market. Almost everyone has a trim gun now and I like different brands for different processes. I love my deWalt straight 16g. I loved both Hitachi and Senco angled 15g. I have yet to use an 18g that was not passable. Festool was designed for site use. I do not get the impression that people understand this probably because of the cost. Festool are German designed for the German method of site building almost everything wooden. Americans seem to be unique in buying the tools to leave them in a shop. Shops tend to be a first world luxury. Quote
PaulMarcel Posted May 27, 2013 Report Posted May 27, 2013 I use a compressed CO2 bottle instead of a compressor with a gun. Much nicer not hauling a compressor or needing a site plug (can be trickier in the UK with 220V mains standard vs 110V job-site standard). I'm not sure the availability of compressed CO2 refills in the UK, though. No compressor noise, no long hose snagging you on a rooftop, list goes on. Hooks onto your belt with a short whip. Regulated pressure between 25psi and 300psi (yeah, 300; no problem for framing nailers or re-centering off-road tires As to the usual complaint that it's a one-trick pony since you can't use it for HVLP, it's true, but you likely know if you need HVLP on a job site before leaving; having both separate is nice. There are better job-site airless sprayers anyway. Quote
WelshWood Posted May 27, 2013 Author Report Posted May 27, 2013 Was thinking of getting the bosch palm router for edge work and routering hinges, but from a friend on site he has said that there isn't much room to actually see what you're routing.. and also heard that the trend 900w model is a pretty decent router for hinges? Never really worked with any portacable kit so will have to look into that! Do any of you buy used tools from ebay? bit of a sceptic buying second hand at the moment.. ~WW Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.