Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishing a live edge slab

Featured Replies

I recently bought a live edge slab of ash that I am going to turn into a side table for my office.  I built two stand-up desks of ash earlier this year and am going to finish the live edge slab with the same finish - 1/3 BLO-1/3 Polyeurethane-1/3 mineral spirits, which I used as a wipe-on finish.  My question is whether the bark should be covered the same as wood, or whether I should leave the bark natural.  I generally experiment on these types of issues with scraps, but I don't have any live edge scraps.  Any thoughts or suggestions?

Most live edge tables have the bark removed because I think of fear that the bark will slough off eventually. Between the bark and the tree is the cambium layer which is a paper like layer  that's holding the bark to the tree if this layer fails the bark edge fails. In my opinion(that and a dollar will get you a cup of coffee) I would remove the bark edge clean the edge with a wire bush or wire wheel on a drill and lightly sand than finish the table with your Sam Maloof 1/3 1/3 1/3 mix and, be done with it. Good luck 

cambium1.jpg

There are two kinds of bark on dead wood.  That which has fallen off, and that which will.  

 

Take it off yourself, and then you can sand and finish the edge of the slab to keep it looking great for years to come.  

 

+1 for PBs recommendation.  Pressure washer works great on large slabs.  

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.