Jeremy German Posted June 12, 2013 Report Posted June 12, 2013 With vacation comes shop questions. I'm slightly confused over zero clearance inserts. My Sawstop came with one, but once I cut miters I'm going to need one specifically for that right? One for whatever angles I want to cut? Infinity tools makes some special inserts for Sawstop with some comments about having to throw out inserts over and over. Why would you need to do that? Do they get chewed up over time? Thanks in advance, this forum has helped me a lot as I get started with woodworking. Quote
dwacker Posted June 12, 2013 Report Posted June 12, 2013 No that would be insane. Just make a wide one that can be used for lots of angles. You only need to worry about it if your having tear out issues, the off cuts are to small and get jammed or you doing a balancing act on the kerf slot. Just use some common sense there is no need to have a whole bunch of zero clearance inserts. 1 Quote
mikem Posted June 12, 2013 Report Posted June 12, 2013 +1 on PB's post. I have a ZCI for general use, but will grab my old insert when setting the blade at a bevel. Quote
duckkisser Posted June 12, 2013 Report Posted June 12, 2013 you might want to get one for dados its a wide sloted insert to fit a dado set Quote
Tom Crawford Posted June 12, 2013 Report Posted June 12, 2013 Which SawStop do you have? I have the Professional Cabinet model and the 'zero clearance' that came with it really isn't. It is close but not as close as one that you make by raising the blade up through the insert. It is beveled on the underside so it can be used at blade angles up to 45 degrees. So far I've found that with a Forrest Woodworker II I've not needed a tighter ZCI. Quote
Dave H Posted June 12, 2013 Report Posted June 12, 2013 Make you own zci's once you make one you'll realize how easy they are to make when I make them I make a bunch of them here is a good video to watch http://woodgears.ca/delta_saw/insert.html Quote
rodger. Posted June 12, 2013 Report Posted June 12, 2013 I have 4 inserts. The first is the standard one that came with the saw, one for my regular use blade, and 2 for dado cuts. I have 3 or 4 more that are still blank, awaiting an oddball dado or somethiNg like that. I make ZCIs out of laminate floor scraps. Quote
Steven Reckner Posted June 13, 2013 Report Posted June 13, 2013 Yeah I have one for my dadoing, one for straight cutting, and one for angles thats 99% of what you do anyway, and hell no dont throw anything away I have used my inserts for years and years Quote
Alan Bienlein Posted June 13, 2013 Report Posted June 13, 2013 3 inserts total since I got this saw back in 2005. The stock one for cutting angles and the majority of my cuts. The so called zero clearance for anything that might fall in between the blade and the insert and one for dado cuts over 3/8" up to 13/16" wide. Never needed any more than that and never ever saw a reason to make any more than that. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.