Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Small but Useable

Featured Replies

So, here is my "small but useable" shop. 

 

I originally built this 1500 sq ft building as a recording studio.  That should explain all the glass..

 

Without going into too much detail, my dedicated audio engineer is going thru the cancer battle.  That battle started a little over 2 years ago and we just don't think he'll be back.

 

So, as I'm not going to give up my day job, it was just time to move on in life.  I live in a very small town and the studio was simply not going to support the family.  The pictures below are the current "shop".  It's the 600 sq ft live room of the studio. The rest of the building is a hobby (quilting) room for my wife, a storage room, another work area for metal/automotive work off of the attached garage, and a soon to be finishing room.  The garage is another 24 X 28 'L' attached to this building.

 

At one point, most of the equipment was on wheels in my garage.  Now, the only part in the garage is the dust collector and the air compressor.

 

The bench in the first pic was the first thing I built for the shop..  Sure wish I'd of seen that Roubo first!

 

If there's any particular questions, feel free.  I've certainly seen a lot nicer and better equipped shops from some of the rest here but, we all have to start somewhere!

 

 

5red.jpg
 

iiry.jpg

  • Author

I did for a while..  They were major dust magnets... ;)

 

The building still has floating double layer walls that are insulated really well.  No matter how loud stuff gets, you just can't hear it outside. 

 

I just finished a project and did a clean..  Good time for pics...

Nice shop, TIODS. My only question is, where do you put your planer if you have more than a 24" piece to run?

  • Author

Planer isn't bolted down so, usually ends up on one of the benches.

 

Still trying to talk the wife out of about half her quilting room for the stuff I "just need more space for"... :)

post-2926-0-26604600-1314125390_thumb.jp
post-2926-0-16938100-1314125206_thumb.jp
Tiods I have the same Griz lathe and, the same bandsaw, nice shop.
  • Author

Love the slabs visible in the first pic.

 

Thanks! Just picked those up tonight for the next project.  Couldn't pass up the awesome deal!  Black Walnut - 200 bucks for those and all the figured maple!

 

 

 
 
Tiods I have the same Griz lathe, nice shop.

 

 

Thanks!  I'm still a moron on that thing but, learning!

A great shop starts with a great space. You have just that.

 

I like the layout. It looks like you could have a really good workflow there.

  • Author

Thanks!  The workflow improves with each project..  If I find myself walking a lot for a specific item, it gets a new home!

 

 

Love the idea of the t-track on the cross cut sled.

 

They come in real handy from time to time! 

Thanks for the pics! I enjoy seeing how other people have their shop set up, especially the small shops. My shop is small too and when I am in the middle of a project I take a lot of space in the garage and it becomes a huge mess.  I would love to have sound proof walls, as soon as my daughter goes to sleep shop time is over :(. I may have to send her and her mom back out to San Diego for vacation, lots of time in the shop when they were gone  :D. Where in Washington do you live? I am in Oak Harbor. 

  • Author

I'm about 20 miles North of Bellingham.  Not too far from you.

 

The sound proofing is not difficult or expensive to do.  Just takes time which is something we're all usually short on.

Very nice, even with the dust, I may just have left the acoustic treatments, isn't that what the shop vac is for? LOL!

 

Nice setup for the first purpose, I helped a buddy build his studio many years ago so I know the work involved, good job. I find that my bench top spindle sander feels better for me down lower and not on a bench top, just something to think about. I think your plainer has a fixed table right? you might want to make some supports that can be clamped to the bench to keep the wood level as you feed it though, or possibly make a riser that fits where the chop saw is so that you can use that bench for both duties, just something to think about.

 

Taking space from the wife?.... well, I go by "happy wife, happy life" so possibly letting her "keep" the space isn't such a bad deal :D

  • Author

The planer usually ends up clamped to my outfeed table (T-Track) and I have an outfeed box that goes in front of it and roller stands if the piece is longer than the table. 

 

The spindle sander is not bolted down either and usually gets moved for work.  I agree with you on the height which is why it's not yet bolted down.  Just spending some time to see how and where it fits into the small shop. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.