baok Posted July 2, 2013 Report Posted July 2, 2013 Here's a project I've been working on for awhile. This is a design from Woodsmith magazine. This is the footboard before any finish is applied but after final assembly. I've been chronicling this in a google+ group just because its much easier to post there with my iPhone. Of course only about six people see it. I have also assembled the headboard. Quote
Darren66 Posted July 2, 2013 Report Posted July 2, 2013 Greg. That's great. Excuse the daft question but do you have to curve the tenon shoulders or is the curve in the top rail shallow enough and rails narrow enough for the shoulders to be straight but cut on a slight angle? Quote
baok Posted July 2, 2013 Author Report Posted July 2, 2013 In that Woodsmith design, the top and bottom rails are both in two pieces; basically you lay two boards next to each other and route out dados for those vertical slats and then clamshell the two pieces together. The former dados become through mortises and you just shove the vertical slats in. So no tenons need to be cut on the vertical slats. Quote
Darren66 Posted July 2, 2013 Report Posted July 2, 2013 Greg thanks, very cunning! Glad I asked as I wouldn't have thought of that. Quote
baok Posted July 5, 2013 Author Report Posted July 5, 2013 And the project moves on; I'm now putting the finish on. This is the part I hate; wipe on, wait, sand ( or steel wool). *yawn* I also need to start work on the side rails. I've been avoiding those since I'm so excited to have the other parts looking so good. Quote
baok Posted July 25, 2013 Author Report Posted July 25, 2013 Complete! All it needs is a mattress. Quote
wdwerker Posted July 25, 2013 Report Posted July 25, 2013 I use those plastic abrasive pads instead of steel wool. Nice piece of furniture ! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.