Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Wood blotching BEFORE finish?

Featured Replies

Here is a few quick pics of a slab top I am working on. I hand planed it flat, and then cleaned it up with sandpaper (150 followed by 220). The issue is that the wood looks blotchy even before finish. I put some water on it to highlight what I am referring to. The base is cherry, and the top is pine (I think, I'm not quite sure as it was a random board/slab found in my friends garage).

I kind of expected it to blotch around the knots, but is also blotchy in areas clear of knots. I plan on finishing it with oil based wipe on poly.

Any ideas?

Ps the colour match is much better than it appears on my iPad camera!

post-6372-0-11257200-1372811798_thumb.jppost-6372-0-33960600-1372811909_thumb.jp

Shellac seal and then poly on top? I think I saw Marc do something like that in a video, but don't quote me on that.

When you say it is blotchy before finish, are you referring to it being wet down with water? or dry?  If you mean wet down with water, it is simply showing you the "water-based" version of the blotch as opposed to the "solvent-based" version if you used Mineral Spirits/Naptha.  If you mean dry, then I dunno :)

 

A seal coat of shellac sprayed works well.  I usually use Charles Neil's blotch control.  It works under water-based and solvent-based finishes very well and doesn't require spraying.  

  • Author

When you say it is blotchy before finish, are you referring to it being wet down with water? or dry?  If you mean wet down with water, it is simply showing you the "water-based" version of the blotch as opposed to the "solvent-based" version if you used Mineral Spirits/Naptha.  If you mean dry, then I dunno :)

 

A seal coat of shellac sprayed works well.  I usually use Charles Neil's blotch control.  It works under water-based and solvent-based finishes very well and doesn't require spraying.

Good tip! I'm gonna wet it down with mineral spirits and see what it does. The photos show it with water.

Well, you'll get the same blotch with Mineral Spirits. I just misread your original post to mean you saw "blotch" while the project was dry.

 

Pine will definitely blotch with either type of finish unless you do something about it.  Spraying to get identical amounts of finish over the whole surface is an option if you can.  Otherwise, blotch control.  It works below a clear coat, not just color.

 

Here's a link to my Tim Burton table build; it starts after putting blotch control on the curly Cherry top (very blotchy when tested on scrap, but you knew that with curly Cherry!).  At this point, I'm applying equalizer before a final color and solvent-based clear; the equalizer balances the boards and masks the sapwood you see in some areas. You aren't using color, but the point is slopping on that color heavily then wiping it back would be a disaster with curly Cherry (worse with Pine) if it wasn't for the blotch control.  Application of the blotch control was back a couple seconds here.

Take a different approach to looking at it. Those are figured grain, think of them as features!

Yeah Im with Steve , the figure in the cherry adds to the look .

  • 4 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.