G S Haydon Posted July 7, 2013 Report Posted July 7, 2013 This is nothing more than a copy a paste post, although having said that, on this occasion that seems just fine. Andy, the guy who put together the is involved in trying to raise the quality of saw files. I know that simply signing an online petition means very little, but if you view adding your signature as a "Thank you" to Andy for making such a great free video then it makes it a no brainer. This is the link to the petition https://www.change.org/petitions/saw-file-manufacturers-please-make-quality-files-for-sharpening-handsaws Andy's words The problem with the saw files available today is that they are not consistent in their edge profile, their tapered shape, or their hardness, even from the same manufacturer. Bahco and Grobet Swiss are about the best that are currently available, but that doesn't mean they are good enough. The petition that Brett has started and which is now on many woodworking forums around the globe is really to say to the maufacturers that we want quality of design and manufacture, consistency and reliability, all at a realistic price point. We don't expect to buy two files from the same manufacturer, one of which will sharpen quite a few saws before it goes dull, whilst the teeth on the other one will crumble away after just a few strokes.This is a global issue that affects all woodworkers whether you sharpen your own saws or not, because even the people you send your saws out to have to use the same files as those of us who do sharpen our own saws. Having to use crappy saw files is the biggest hindrance to people learning the art of saw sharpening. I for one would not like to see the art die and therefore I fully support this petition so that the next generation can hopefully enjoy the benefits of sharpening their own saws too. Saw sharpening isn't dying, it is growing as more and more woodworkers recognise the enjoyment that comes from using hand tools.If you care about maintaining the quality of tools, please support what Brett is trying to achieve here. Please don't underestimate the power of the internet. Together we CAN make a difference. I Quote
TobyC Posted July 8, 2013 Report Posted July 8, 2013 Excellent!! Thank you for starting this here, we are getting closer to the 500 minimum signatures on the petition, but we're not there yet. If you file you're own saws you know how the quality of saw files has diminished over the past few years. And if you send your saws to someone else to sharpen, remember that they need good files to sharpen YOUR saw, Even if they use a saw filing machine like a Foley or Acme, those machines use tapered saw files. So please take a moment and sign our petition, we need better files. 1 Quote
Tom King Posted July 8, 2013 Report Posted July 8, 2013 I wish this project luck, but I'll be surprised. I filled out the form anyway. There are still good chainsaw files on the market, mostly from Germany, but I expect there is a lot more demand for them than saw files. Every sawyer in the woods is carrying a file. It used to be that every carpenter bought files frequently, and any general merchandise store sold them. I've thought for a while that someone like one of the diamond stone manufacturers could make some triangular "files" that would work as good or better than what's on the market now. I've always tried to use the whole length of a file. Every video I've seen on the internet shows the person taking several short strokes. This only uses a very small part of a file, shortening it's useful life. Often you can't take a whole stroke, or you will take too much off, but you can still start near the end of the file, and move down the line of teeth without backing up until you have used the whole length of file. When sharpening a chainsaw chain, I use the whole length of the file and count strokes on each tooth, so they all end up several sharpenings later close to the same length. A chainsaw chain is a good place to start to learn how to sharpen anything with a file, and it really should be done every time you fill the tank up again anyway. It doesn't take too much practice in sharpening a handsaw to know how far to push the file to get to the halfway point on the jointed flat, if you already have a feel for a file. Sharpening a handsaw is a lot harder than sharpening a chainsaw chain, and a lot to learn without first having a good feel for a file. I think it's a hard thing to learn all at once on a handsaw, but it's one of those things that's easy once you do learn to do it properly. I don't think I've ever put a file to a handsaw, once I learned how properly, without jointing at least a little bit, to start with. I always use the jointed flat as a guide. Quote
TobyC Posted July 9, 2013 Report Posted July 9, 2013 Thanks Tom, You should always joint first, and most of the videos are crap. But not this one. Quote
TobyC Posted July 10, 2013 Report Posted July 10, 2013 Only 12 more till 500! The pen,... I mean computer,... is mightier than the sword,... I mean file manufacturer! We’re gonna kick the bean counters square in the beans!!! Please take a moment to sign our petition. Quote
Tony Wilkins Posted July 10, 2013 Report Posted July 10, 2013 Didn't like giving my address but signed 1 Quote
TobyC Posted July 10, 2013 Report Posted July 10, 2013 I tried leaving that blank but it wouldn't take it. So I put N/A, and it worked! I don't like giving that either. Thanks Tony! Quote
..Kev Posted July 10, 2013 Report Posted July 10, 2013 I also don't like giving my addy.. The "NA" worked great and I added mine to the list. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.