Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Two site shop

Featured Replies

I am debating moving the majority of my tooling into the basement while leaving my table saw on a mobile base in the garage. Direct access from garage to basement. Will I regret the 30 feet of travel?

If you are able to plan your project flow so that you are not having to move your work pieces back and forth a lot, then that may work.  I know of a couple people who have done something similar by having a machine area and a hand tool are in two different rooms.

 

However, my table saw is my most used machine hands down, and often get used for parts of the project right up until sanding and finishing.  I think it would get old real quick having to move up and down steps with work pieces to make a quick cut on the table saw.

You could think of it as part of your daily workout routine :P

How far is it to your workbench? For one or two cuts, it may  not be too bad but I think it would get old pretty quickly if you had any volume of cuts to do.

  • Author

I was really expecting these responses. I am in a new (to me) house. It does not have the standalone carriage house my prior home did. I am beginning to compete for space as my kids grow. I have loads of space available in the basement but without money for DC I am hesitant to pull the trigger and move downstairs. I really did not expect a positive response but I am trying to consider all my options before I get too settled and watch the flexibility disappear until my kids move out:-)

It may just be a temporary solution while you save for a dust collector. My kids are grown but the grandkids are starting to take over my place. I may loose my wood shed to a swing set soon.

if you're anything like me and end up forgetting a tool, it will eventually be one of the worst decision you make! haha

CS, if you have the room in your basement, I think I would try using a shop vac, as a temporary measure, for your dust collection option on the table saw. Try it first in the garage and if you get good enough results, move it downstairs too.

 

If you have a contractor-style ts, not even a dc will give you good results.

I have my workshop in my garage but live in a cold climate.  During the warmer months I do the majority of my work in the garage but in Winter I do my glue ups and finishing in the basement.  I'd rather keep in all in one place but the garage isn't insulated or heated (wood stove only raises temp about 10d).

I'm in the basement for the first time...always had garage shops until now.  I use the shop-vac, hooked up to a dust hood under the table saw.  It does really well for most cutting at collecting the dust and chips.  Same with the band saw and jointer.  I do move outside for any serious sanding though.   I personally wouldn't go for having the table saw away from everything else.  I use it on so many projects, it would really be a pain to have to travel back and forth.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.