Recommended Posts

Posted

I have a set of Jennings-type auger bits. The lead screws seem to have a pretty fine thread pattern but they also look a bit odd – as if there’s two sets of threads. At any rate, I was trying to bore out some cherry earlier this year and the lead screws kept getting fouled with cherry and would stop advancing. I had to dig the crud out with an awl repeatedly until I gave up and began using a power drill with a modern bit. I briefly tried them out on some pine and things seemed to work OK.

Was I using the incorrect bit for this type of hardwood? Do I need a coarser lead screw or what?

Posted

Is there any such thing as a new Jennings bit? I bought them from Patrick Leach - the lead screw threads seem pretty sharp. Hard to judge though due to lack of experience.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.