Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Anyone use Portamate wood rack?

Featured Replies

I am moving my wood rack, and at the current sale price at Woodcraft the Portamate looks to be an interesting alternative to making one out of wood, or buying the shelf track system from the local home center.  I'm curious if anyone has any feedback on it.

 

I have two of them setup. 

 

They go up pretty easy, about 20-30 minutes for a rookie, second went up in about 10 minutes.  Mine are set in a poured concrete basement wall and thus far have held a ton.  I may actually pickup another as long as woodcraft has them on sale.  They seem to go on sale for about $40 2-3 times a year, so I wouldn't pay more then that.  

 

This image was taken right after a major project completion, so that is about the lightest load they see.   500+ pounds of lumber is not uncommon.  I

 

post-7224-0-84896600-1376595669_thumb.jp

  • Author

Chris, how did you attach it to the wall?  That's pretty much what I'm looking at doing.  I might get 2 of them so I can put more supports along a 10' wall section (maybe 32" on center)

I have had the Triton wood rack for a while now - it appears to be the same including the paint color.  It is a nice rack. (things that sound dirty but aren't)

 

Originally I had it mounted on a block wall with tapcons.  When I moved I put up studs and USB over the block wall to insulate the garage shop.  I didn’t plan ahead and put up studs where I wanted to hang the rack and I wasn’t sure the rack would not pull out of the USB.  I ended up lag bolting a piece 3/4" plywood to the studs and then lag bolted the rack to the plywood.  It has stayed in place for more than a few years.

I attached mine with tapcon screws.  I think 1/4"x3"...maybe.    (that is only like 1.5"-1.75" in the wall, pipe + wall spacer eats up some length)

 

Burned through 2 bits getting them up though.  Be sure to bring a cup of water and dip the bit regularly.  

 

As for the gap, it will depend on your lumber needs.  My mill seems to love to cut things in 10'-12' lengths.  I went 5'-5.5' on the first set and then ~30" on the second set to hold the shorter lengths.  I find the >5' to be troublesome with wood not in it's rawest form though.  I somehow always remove just enough material to end up with 5' boards and a 5'+ gap....Murphy's law.

Chris, hammer drill or no? I've drilled near a hundred tapcon holes on a single bit.

Personally I would not trust Tapcons with this kind of load. The load is both lateral at the top and shearing vertical at the bottom. I would prefer a healthy wedge bolt that is rated for shearing loads and then Tapcon the top. I know there will be guys who have done this and had no issues with Tapcons, but I have seen too many Tapcons work loose in imperfect concrete. Wedge bolts need a much bigger imperfection to fail.

(Reading my own post) *Gasp* Have I become that safety guy from YouTube???

Yes, hammer drill.  I am sure it's user error.  Also, basement walls in WI seem to be extremely loaded with stone.  

 

I am sure there are better options over tapcons.  They are economical though, and have held for quite a while.  I think they are rated for 250 lbs a piece, so that is 1500 lbs. across the rack.  (if you can do the math that way???)  

Hi John. I did a video a while back on the installation of my triton racks. Same as the ones you are considering I think. I waffle on a bit but its good for someone who wants more detail on the process.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.