chrisphr Posted August 17, 2013 Report Posted August 17, 2013 I thought it was pretty slick the way Marc smoothed out the seems of the g&g chest glue edge panels with a cabinet scraper so I bought a used one on eBay for $28. Since it is "vintage", no instructions and I can't figure out how to set it up to work. Are there any good reference materials out there to learn how to tune and set up this tool? Thanks in advance! Quote
G S Haydon Posted August 17, 2013 Report Posted August 17, 2013 Hi Chris, Not used one myself although there is some guidance here http://paulsellers.com/2013/07/cabinet-scrapers-answering-whats-needed-in-real-woodworking-realms/ http://paulsellers.com/2013/07/fine-woodworking-myths-and-mysteries-busted/ Quote
missioninwood Posted August 17, 2013 Report Posted August 17, 2013 The LV website has an excellent "instruction" sheet for their Cabinet Scraper. I have found it an excellent reference. Beware, the tool is notoriously difficult to set-up, especially if the sole is not flat. miw Quote
slachammer Posted August 18, 2013 Report Posted August 18, 2013 I got one of these off ebay too after watching marcs video, I searched some videos on you tube https://www.youtube.com/watch?v=ylmCfOH4k0Q https://www.youtube.com/watch?v=QQfCdmEWJF8 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.