theodorescott Posted August 29, 2013 Report Posted August 29, 2013 I just finished making a wooden low angle spokeshave. The hardware is from Lee Valley. As an aside: the instructions that come from Lee Valley say that a drill press is necessary, because the holes need to be perfectly perpendicular and parallel to each other for the thumbwheels and the blade to fit properly. Since I lack a drill press, I let this delay me for a long time. When I finally decided to try building it using only hand tools, counter to the instructions, it came out perfect on the first try. So, learn how to use your eggbeater well enough, and you don't need the drill press for this. Quote
Llama Posted August 29, 2013 Report Posted August 29, 2013 I like it! Good use of a small piece of wood. Quote
TRBaker Posted August 29, 2013 Report Posted August 29, 2013 Nice work, Theodore. Welcome to the forum. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.