Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Farmhous table & am I woodworking snob?

Featured Replies

Not sure how I missed this thread, but great job Chet!  How much time did you actually have into it?  (I suppose I should read all the prior posts to see if you already answered this Q :rolleyes:)..

Great job Chet! The finish looks awesome, besides if you didn't stain, the walnut would probably lighten with age and she may not like that. I love how the design from the table followed to the bench, very nicely done. :-)

  • Author

Chopnhack, not sure how much time really. I spent about a day milling that pile of walnut into usable stock. I had to do that before I did anything else. I actually handplaned the middle board on the top of the table. I basically followed Graham's technique shown in another thread where he flattens a board.

 

After I got my workout in, I looked at the amount of stock I was going to have to work through and decided it was best to use the sled I built for my planer and flatten the rest of the boards that way. After that the joinery is pretty basic so not too tough. I'm thinking I have a total of about 4 days of work, which wouldn't include finishing time.

Chopnhack, not sure how much time really. I spent about a day milling that pile of walnut into usable stock. I had to do that before I did anything else. I actually handplaned the middle board on the top of the table. I basically followed Graham's technique shown in another thread where he flattens a board.

 

After I got my workout in, I looked at the amount of stock I was going to have to work through and decided it was best to use the sled I built for my planer and flatten the rest of the boards that way. After that the joinery is pretty basic so not too tough. I'm thinking I have a total of about 4 days of work, which wouldn't include finishing time.

I searched for the post by G, but unless I am not understanding how to search this site properly, I didn't find a post made by him discussing this. Do you have a link to it?

  • Author

Oh, crumbs.
Now I can't find it either.

It is part of a thread discussing benches and more.

It's actually a video of Graham flattening a board.

Maybe, if you IM Graham, he'll direct you to it.
Sorry, man.

I just couldn't find it now either.

Oh, crumbs.

Now I can't find it either.

It is part of a thread discussing benches and more.

It's actually a video of Graham flattening a board.

Maybe, if you IM Graham, he'll direct you to it.

Sorry, man.

I just couldn't find it now either.

No worries, thanks, I will!

Chopnhack, not sure how much time really. I spent about a day milling that pile of walnut into usable stock. I had to do that before I did anything else. I actually handplaned the middle board on the top of the table. I basically followed Graham's technique shown in another thread where he flattens a board.

 

After I got my workout in, I looked at the amount of stock I was going to have to work through and decided it was best to use the sled I built for my planer and flatten the rest of the boards that way. After that the joinery is pretty basic so not too tough. I'm thinking I have a total of about 4 days of work, which wouldn't include finishing time.

 Holy s=&t, you followed my guide, and you got results that good! You must of followed some other persons guide  :P. For anyone else who want to have a look at the article I did find it here http://gshaydon.co.uk/blog/preparing-wood-with-hand-planes . 

  • Author

Graham,

I love that video. It is the best "This is the minimum you need to know to make a board flat" video I've seen.

 

I especially love the tip about the wood body jack over the metal. I've repeated it several times since then and let people believe that I thought of it. Sorry.  

Chet, thanks! Take the wooden jack tip, it was never mine or anyone else's anyway, it's just a fact that they make awesome jack planes in the true meaning of the work. I just had the good fortune to pass it on, to think you are doing the same is awesome. I really love the £1.00 jack. I think the wedge adjustment can be off putting, when I was a lad I thought "WTF is that all about". Now I'm using it I'm loving it! 

My first thought is that is some pretty walnut. I like this style, so I don't have much criricism. But I agree that the bench has something about it that is a notch up from the table. Maybe it's just that it's smaller and the design elements are more striking at that scale.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.