Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

What's the best finish for kitchen cabinet shelves?

Featured Replies

In the house we're moving into, the 30-year-old particle board kitchen shelves (inside the cabinets) are sagging to the point I'm just getting rid of them. In our current house, I caught the problem before there was too much sagging and reinforced the shelves around the edges by supporting them with 3/4" square cleats all around the edge rather than those little peg things. So I'm going to do that for these shelves but I also need to remake the shelves themselves. I've cut down a bunch of 1/2" Baltic Birch ply and faced the front edge with a strip of solid ash that I got on a ridiculous sale. Now, I need to pick out a finish. The original plan was just some latex paint because they are, after all, just shelves in a cabinet. Then I heard that latex paint can lift away from the substrate in the presence of water. Since it's possible from time to time something may get put away without being dried perfectly, that's a non-starter. I covered the shelves for her fish tank stand with General Finishes High Performance waterbourne poly and it has terribly poor blocking resistance. Looks pretty, feels nice to touch, but if you leave something on it for a week or two, it sticks like crazy when you try to pick it up, so that's a non-starter as well.

What I need is a non-oil-based finish with high blocking resistance and at least moderate durability in the presence of water drops. Since they're just cabinet shelves, it can be an opaque finish (paint) or a clear finish (shellac? poly of some kind?).

Thanks guys!

GF Enduro-var and Enduro poly are cross linked and will give better water protection than the High Performance.

  • 2 weeks later...

None of the GF finishes do well in kitchens over time. You are right latex is not a cabinet finish. If you are up to shooting with a solvent finish try a good vinyl sealer topped with lacquer pigmented to match your color choice. Even better would be a conversion varnish. Its a little tougher to spray but since they are shelves this may be a good time to get some practice. For the best of both worlds would be a 2k poly but you need to make sure you use in a very well ventelated spray area which may knock it out of the running especially this time of year.

 

FWIW 1/2 is to thin for cabinet shelves. 

Why rule out oil-based finishes?   If you can't spray a finish I think oil-based poly might be your best bet.  

  • Author

Why rule out oil-based finishes?   If you can't spray a finish I think oil-based poly might be your best bet.  

 

I have some chemical allergies and it's not worth my time to sort out which oil based finishes might be OK vs are going to be a problem. Couple that with the fact that an oil based finish will take YEARS to stop stinking inside a confined space like a cabinet and it's just not something I'm willing to do.

I have some chemical allergies and it's not worth my time to sort out which oil based finishes might be OK vs are going to be a problem. Couple that with the fact that an oil based finish will take YEARS to stop stinking inside a confined space like a cabinet and it's just not something I'm willing to do.

 

 

Got it.   Sounds like you already built your shelves but you can get plywood with a factory finish.  I don't know exactly what they use but it is designed for cabinet interiors and shelves. 

  • Author

Got it.   Sounds like you already built your shelves but you can get plywood with a factory finish.  I don't know exactly what they use but it is designed for cabinet interiors and shelves. 

In retrospect, that would have saved me a lot of effort.

Not that it is necessary for this project, some furniture factories will do a UV-cured coating for not a lot of money. A local drawer builder did projects for a friend of mine. Besides looking really good, you have it completely coated once it pops out the conveyor belt.  Good luck sanding it off it you change your mind :)

In his case it was a custom dining table, but good to know about prefinished ply.  If I did a custom table for dining, I'd consider the UV finish.

Williaty, if you don't want the smell, and you can't spray it yourself, I would check out a local cabinet shop and ask what they would charge to lacquer the shelves for you. The lacquer doesn't have a lingering after-smell since the solvents dissipate so fast, and the finish looks great. Just a thought.....

I'm planning to use milk paint and then using a liner for the shelves.

Change out liners every few years because they get dirty.  

I don't like to clean the inside kitchen cabinets. 

 

There are many types of liners.  

Use a natural, organic material if possible.

I'm a VOC fanatic and I don't want any chemicals near my dishes/food.

For a while I've been using GF Pre Cat urethane for doing cabinet insides . Now I buy pre finished ply .   The PreCat is super easy to apply you can spray or roll it out . I used to pre finish ply sheets using it and rolled it out . It's fast and leaves a nice smooth surface .

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.