Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

black/dark varnish for baltic birch plywood

Featured Replies

Hello all, 
 
for my first project, which will be a contemporary book shelf, I will use 1/2" birch plywood. Initially black phenolic faced plywood was the material of choice but this stuff is really hard to get and expensive. Therefore I decided to make a kind of test shelf with baltic birch plywood first before I order the expensive stuff to see if I can build it the way I want it,  which basically means with the necessary precision. It will be a little smaller and can go in the basement as storage space if the result is not convincing. 
The nice thing about phenolic faced plywood is the fact that the surface is already prepared and there is this nice contrast between the bright trimmed edge and the black surface. 
However obviously I will not have this effect with normal baltic birch plywood, thus I thought about coloring the panels before I cut them.  
 
Unfortunately I have "zero to no" experience with coloring wood. In the past I used some of this stuff http://www.osmo.de/opencms/en/index.html wich is pretty easy to handle and very environmental friendly. 
I am looking for something similar, easy to apply,  good abrasion resistence and fast drying. 
 
Any thoughts?
I appreciate any help and advice.
 
Thanks,
Chris
 

Black dye, I use alcohol soluble, and a clear top cote.

Or you could get some black laminate and glue that to the surface. Black and white laminate are commodity priced, you shouldn't have to pay the full price per sq. ft for it. About a buck or so per sq ft in full 4x8 sheets. The Wilsonart H2O water based contact cement works great, it's about $50 a gallon.

I use Sagulator on most of my shelf spans to figure out the edge trim size needed and I have been doing this professionally for over 35 years! Great program!

  • Author
thanks for your answers, there seems to be no real easy solution to that task. In the meanwhile I did some more research on the phenolic faced plywood and I could probably get it from WhiteCap in Baltimore, thus I will not try varnish on my test object. However, India ink or black dye with a clear top coat would probably the preferable method, even though it is not easy to apply.
 
Thans for the link to the "sagulator", interesting program. The book shelf I am building has only 12"  wide shelfs which are supported by 1/8 aluminum angles. I would assume that you could store "concrete books" on these shelfs without any sag. 
BTW this construction is not my idea, it is basically a copy from Alexander Kufuss book shelf "FNP" designed in 1989.
 
Thanks
Chris
 
P.S. The attached picture will give you an idea about the construction of the book shelf.
 

post-14659-0-99803300-1382790701_thumb.j

I've 'painted' birch plywood simply by adding a universal colourant to a water based varnish, though I used a brush - I think wiping would have given a much better result. About 25ml of colourant to 250ml of varnish. Took five coats to get the effect I was looking for.

 

post-2037-0-50372800-1382807046_thumb.jppost-2037-0-75466300-1382807055_thumb.jppost-2037-0-57616900-1382807065_thumb.jppost-2037-0-75550200-1382807100_thumb.jp

 

HTH

 

John

Black dye, I use alcohol soluble, and a clear top cote.

Or you could get some black laminate and glue that to the surface. Black and white laminate are commodity priced, you shouldn't have to pay the full price per sq. ft for it. About a buck or so per sq ft in full 4x8 sheets. The Wilsonart H2O water based contact cement works great, it's about $50 a gallon.

+1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.