Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Vise question

Featured Replies

Hey everyone, I'm considering installing a quick release vise like the one Chris Schwarz used on this roubo of his: I've got a Jorgensen quick release face vise and I'm worried because the instructions warn against installing it in end grain. I haven't read much on how Chris built his bench but I was wondering if anyone has ever just screwed it to the end of the bench anyway, or if you've come up with a creative way of installing some long grain wood to the end before putting the vise on.

 

Also, I'm considering the merits of removing some material under the top so the portion where the vise goes is thin enough for the tops of the jaws to sit flush with the top of the bench, instead of adding a large block to the jaws like Chris did on his bench. What do you think?

 

Thanks!

You can drill up from underneath to put a large diameter dowel for the screw to bite into.

 

Better to cover up the jaw with wood, but umm, mine has been waiting for me to get around to do that for about six years now...  I kind of doubt it's ever going to happen before I build a new bench at this point.

Hello arco21,

 

I would just use some longer screws, if it gives over time think again. They don't get put under too much stress unless you are using them with dog holes. Perhaps then take the step mentioned by krtwood which is a nice idea.

  • Author

Thanks guys! I'll definitely try putting some dowels in there. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.