Recommended Posts

Posted

I picked up this old saw at a flea market for 2 bucks.

 

post-13786-0-33705800-1386826736_thumb.j

 

There was some rust here and there, but the teeth looked good, the blade was straight, and the handle was intact. There was some green and black paint on the handle on one side, and the the other side had layers of grease and dust caked all over. 

 

I removed the nuts, handle, and popped off the spine (that sucker took quite a bit of patience). The nuts, blade and spine were soaked overnight in a vinegar bath, and then cleaned up with WD40 and a scrub pad. 

 

I stripped the handle with some sandpaper and a half-round file...and discovered under all the green paint that a previous owner (O.J. OLSON) had put his name on it with an ink stamp. Most of the name came off with the sanding, but I kept some of it on the handle...I like the way it looks. I refinished the handle with Watco's Danish Oil, and then put it all together. 

 

Here's the after pics:

 

post-13786-0-51396000-1386826735_thumb.j

 

post-13786-0-61021900-1386826734_thumb.j

 

I kind of like bringing these old saws back from the dead...there's something about the transformation/redemption that gives me a kick.

  • Like 1
Posted

Looks great!  I've had intentions of doing that with my backsaws, but ended up just sanding the rust off, sharpening, and using them.  Do you have a miter box to use it in?

 

Nope...but I'm keeping an eye out for one. 

Posted

I just checked ebay, and there are a couple of good ones there.  I can't copy and paste here now for some odd reason, but do a search for "millers falls miter box"  on ebay and there are two good ones.  One is buy it now for 75 bucks that has everything there, but there's 25 bucks shipping.  There's another one like new that bidding ends on in 3 days currently at 50.  I used one for 20 years trimming out house interiors before someone built a power miter box that I liked.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.