Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Dust collection thoughts

Featured Replies

Hi folks,

Just setting up my shop and going to purchase a dust collection system. My shop is 20x30 and all tools will be stationary so i will have a main line with branches and dust gates to each machine. I will have a seperate room for a compressor and dust collector which will have an insulated door for sound. My question is will there be an advantage to a cyclone system over a canister type in a closed room where I am not as worried about a little extra dust from the bags on a canister? It seems as the canister types offer higher cfm for a lower price. Is my thinking off on this?

Thanks

Shane

The cyclone is king of the dust collection world. If you have the funds, go cyclone!

The cyclone will not lose CFM as the canister fills up with chips and dust. A single stage requires more frequent emptying to maintain the CFM required for efficient dust collection.

Typically a cyclone can also handle much longer runs of ductwork, but this is dependent on the size of the impeller, the motor, inlet, etc.

The cyclone is king of the dust collection world. If you have the funds, go cyclone!

The cyclone will not lose CFM as the canister fills up with chips and dust. A single stage requires more frequent emptying to maintain the CFM required for efficient dust collection.

Typically a cyclone can also handle much longer runs of ductwork, but this is dependent on the size of the impeller, the motor, inlet, etc.

 

I love the fact that I can suck my tape measure through my cyclone. Aside from that it takes a lot of cyclone to outperform a bag system. Cyclones are user friendly not efficient.

I love the fact that I can suck my tape measure through my cyclone. Aside from that it takes a lot of cyclone to outperform a bag system. Cyclones are user friendly not efficient.

Really? I stand corrected and thank you for clearing up my erroneous comment.

Can you elaborate a bit more on how a single stage out performs a bag unit?

Basically the cyclone is additional friction for the fan to overcome. And you still have the filter media to get clogged up. On a bag unit with the same fan and filter area there will be more airflow.

Bottom bags on single stage units are not designed to be part of the filter system although they do when not full of dust.

Also as I have continually experienced the outlet end of the cyclone is at negative pressure and prone to leaking and further reduce airflow. I just deal with it but its robbing from my system.

I have a 7 1/2 hp Torit with a rotary airlock on tge bottom of the cyclone. I have a 14' trailer parked under it. That is the reason to use a cyclone. I'd fill up bags every 10 minutes or less if I didn't have a 2 stage. Really in my opinion a 2 stage without an airlock is no better than a bag unit. You have to dump into a sealed container without an airlock so you are stuck dumping an X sized barrel into the trash just like dumping a bag.

Steve

Its very simple. The cyclone works much like a Venturi. The cyclone takes additional energy to run meaning its own share of are flow that portion of air flow is wasted energy.

That being said cyclones can be very user friendly. Mine is located outside mounted high on my building with no filter to plug up. It fills into a drum that sits over a trailer. The bottom of the drum is hinged and just dumps into the trailer. It takes about two minutes to empty the barrel when its full.

If I had to empty a barrel with my back or deal with filters I'm not sure Id have a cyclone. Most likely a big bag unit in its own room or shed.

PB you should keep an eye out for an airlock. It's awesome to just let it fall into the trailer. I have a few horse people who come and get the shavings too so I usually only deal with the waste a few times a year. I'm not running a filter either. My wide belt is on a separate bag unit so by and large the fines go into the bag unit and the heavy shavings through the main system.

Steve

PB you should keep an eye out for an airlock. It's awesome to just let it fall into the trailer. I have a few horse people who come and get the shavings too so I usually only deal with the waste a few times a year. I'm not running a filter either. My wide belt is on a separate bag unit so by and large the fines go into the bag unit and the heavy shavings through the main system. Steve

I looked for a used one for awhile but lost interest. My hinged barrel works great and all I have to do is pull a string to empty. I just used gate hardware. I'm lucky the yard waste place is a mile away and takes it for free but for the past few years I've been lazy and just dump in my field to keep the grass down.

I looked for a used one for awhile but lost interest. My hinged barrel works great and all I have to do is pull a string to empty. I just used gate hardware. I'm lucky the yard waste place is a mile away and takes it for free but for the past few years I've been lazy and just dump in my field to keep the grass down.

I don't know about Steve, but you live in a cooler climate. Do you make enough shavings/dust for it to make sense to pelletize and burn your waste?

Haha no. I'm just north of Houston. And although I'd like to have heat this month it's just not cold enough to set up the proper heating system. Don't tell anyone but we run a diesel fired jet heater for a few hours a few days in the winter. Open flame plus wood dust equals ???? Nothing so far! Hope to keep it that way.

Steve

I don't know about Steve, but you live in a cooler climate. Do you make enough shavings/dust for it to make sense to pelletize and burn your waste?

 

It really doesn't get that cold here like you would think. Even when we get the rare cold day in the 20's there is usually a burn ban. In fact I think there is a burn ban most of winter. In the summer we do a lot of outdoor fire pit burning at night and just buy end cuts from mcfarland cascade for a penny a pound works out to about ten bucks truck load. If the state had their way wood stoves would be illegal.

It really doesn't get that cold here like you would think. Even when we get the rare cold day in the 20's there is usually a burn ban. In fact I think there is a burn ban most of winter. In the summer we do a lot of outdoor fire pit burning at night and just buy end cuts from mcfarland cascade for a penny a pound works out to about ten bucks truck load. If the state had their way wood stoves would be illegal.

-30 here in GTA today (Celsius)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.