jdbrown1998 Posted December 27, 2013 Report Posted December 27, 2013 Hello I just saw a post for a $900 was wondering if you guys thought this was a good deal? Here is the description and the pic did not show any rust at all it did not have flames though!) - it was their standard yellow. This is a beautiful powermatic 66 left tilt saw with beismeyer style fence system and table extension complete with 6 drawers for storage and mobile base! Quote
..Kev Posted December 27, 2013 Report Posted December 27, 2013 Sounds like a cool deal but, the pic didn't show up. Flames are a bonus not usually used on us mere mortals. Quote
tim0625 Posted December 27, 2013 Report Posted December 27, 2013 1 phase or 3? Comes from a Production Shop or Hobby Shop? For me, 3 phase is a deal breaker. Not so much the shop it was in but if it was heavily used in production, I may steer away from it. Quote
CessnaPilotBarry Posted December 27, 2013 Report Posted December 27, 2013 What else is available locally? Location counts for a lot with machinery, as shipping can be expensive. If it's in nice shape, and single phase, that's a decent to very good price in my area. Two years ago this month, after buying my SawStop ICS, I sold my 11 year old 3HP General 650, with a 52" Biese-clone fence, for $1600 on Craigslist. In TWO HOURS! I did toss in a mobile base, shop-made crosscut and dado sleds, and some shop-made zero clearance inserts, and I take care of my stuff, but I was still very happy to get what I got. Around here, good used, clean, late-model single phase PM66's Unisaws, General 350/650's, etc... with Biesemeyer or Unifences routinely go for $1200-1500. Older, ugly, or semi-thrashed examples still pull $800+. Three phase significantly lowers the market value. Quote
Tpt life Posted December 27, 2013 Report Posted December 27, 2013 Here used production machines go for $600 and up. Quote
Tom King Posted December 27, 2013 Report Posted December 27, 2013 Check the miter slots with a micrometer. I have seen used saws where one or the other was worn enough on the inside width to make a difference in using a miter gauge. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.