bgreenb Posted January 27, 2014 Report Posted January 27, 2014 When we moved into our current house, we were moving from a very small apartment and therefore had no office furniture. Our house has an office that is basically empty. My wife has been after me to build some furniture for it, and she finally motivated me by threatening to buy something online if I couldn't get to it soon enough. So I set about building a writing desk, and will eventually build a wall unit and bookcase to match.I took strong inspiration from Rob Bois' crescent front desk (http://theboisshop.blogspot.com/p/writing-desk.html), and he was gracious enough to give me some measurements and permission to use his design. I've only been woodworking for a little over a year, and frankly I don't have the skill to do the curves and stringing inlay on the top, so I designed my version without the crescent front and stringing, and I also made the legs more traditional cabriole shape. My wife loves cabriole legs, so I figured I'd take a crack at it. The project presented some new challenges for me:- The joinery for the front upper and lower rail called for a hand cut sliding dovetail and twin tenons, respectively. I had never done either before. This required more careful layout and fine tuning than I had expected, but I was reasonably happy with the results with it being my first try.- I had never tried compound curved legs. Marc's video on this helped immensely, but this was a challenge with my underpowered bandsaw. I took it slow and used a brand new blade.- The hand shaping of the legs was entirely new to me. I got an Auriou rasp for my birthday, which made the experience a lot of fun. I had also never used a spokeshave before. This was a very steep learning curve, and there are some flaws that are obvious to my eye but nobody else has noticed (or they're just being polite). But as with the hand cut joinery above, I'm reasonably happy with how they came out for my first try.- The leg design was also done from scratch. My wife and I went through fifteen (yes, fifteen!) different patterns with prototypes cut out from 4x4 doug fir until we found one she was happy with.- I gave extra attention to the grain in this project, and I was able to find a nice board with a concentric oval pattern for the rear apron, which will be visible the way we have it arranged in the office. For the drawer fronts, I found two boards that were relatively close and bookmatched them (I don't have resaw capabilities, so I just had to match them as best I could). You can't make it out on the crappy iphone photos, but the two drawer fronts have some nice curly figure as well.I finished the base with satin Arm-R-Seal and the top with semi gloss.As I said, I'm happy with the final result, and more importantly, the wife is happy. Direct quote "Wow! It's beautiful! ... Now when do you think you'll start on the wall unit??" It never ends...I've attached some pics of the finished product and some process pics.Leg blanks milled up from 16/4 walnut.Leg blanks with joinery cut.Legs mostly done. Still need to scrape and sand.Dovetailed top rail.Base dry fit.Just needs a top.Finished product front.Finished product back. 2 Quote
TerryMcK Posted January 27, 2014 Report Posted January 27, 2014 Very nice work. The grain layout and the legs are fantastic making a really good and pleasing design. Quote
mcollins Posted February 3, 2014 Report Posted February 3, 2014 Awesome! Sent from my iPhone using Tapatalk Quote
Egraff Posted February 9, 2014 Report Posted February 9, 2014 That's a beautiful piece of work right there. Well done! Quote
sunadmin Posted February 9, 2014 Report Posted February 9, 2014 At least I know I'm not the only wood worker who's wife makes me make endless prototypes to her satisfaction. Quote
bgreenb Posted February 10, 2014 Author Report Posted February 10, 2014 At least I know I'm not the only wood worker who's wife makes me make endless prototypes to her satisfaction. "Just a little curvier here.""The ankle is too thick on this one.""The ankle is too thin on this one.""Why is the knee so fat?""This one looks good, but it's really rough - you're going to smooth it, right??"Believe me, it was a long road Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.