campbellmatt1 Posted February 7, 2014 Report Posted February 7, 2014 Hey guys, I was planning to purchase a planer in the near future, most likely leaning towards the SteelCity 40300H. However, a friend of mine offered to give me his old Delta 22-560 planer for free! So, my dilemma is: Do I go with the older model delta (louder and probably a little less quality results) or pay 500 bucks for the new SteelCity. For the purposes of the decision I have already budgeted money for the planer so I don't "need" to save money but obviously not shelling out 500 bucks is always a good thing! I would very much appreciate your thoughts on the matter. -Matt Quote
Tom King Posted February 7, 2014 Report Posted February 7, 2014 We still use an earlier model than that Delta one. The blades are easy to change with the magnetic holders. It has a surprising amount of power, and does a fine job with sharp knives. I bought it new when this was the first model of lunchbox planers ever. It has the worst reputation for snipe, but even without using the infeed and outfeed tables-never have, we don't get snipe just by holding up the board as it enters and exits the machine to the point of picking up that side. The last time we used it was to skim cleanup some new YP 2x12x16s that we were using to make rafters for a boathouse that had a six foot cantilever out one side to cover some JetSki lifts. It did fine, and I hadn't changed the knives in several years. It's a decent little portable planer. Quote
wtnhighlander Posted February 8, 2014 Report Posted February 8, 2014 ... so there is $500 toward a DIFFERENT new tool! Quote
knotscott Posted February 8, 2014 Report Posted February 8, 2014 The 22-560 is a good planer in it's own rite....it's got a cutter head lock so snipe is minimized, and it has a dust chute....free is excellent! Quote
campbellmatt1 Posted February 11, 2014 Author Report Posted February 11, 2014 Yep, I got it all cleaned up but need to get some new bolts for the blade guard as a couple are stripped and I'd much rather have hex heads. Unfortunately, the dust chute has been discontinued (it didn't have one on it) but I've seen a few examples of some custom built dust chutes that look straightforward. Thanks for the advice guys! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.