Recommended Posts

Posted

Does it come with flames on the side? ;)

He who dies with the most tools ... leaves a great estate sale.

not yet, but I've been tempted to add some. Of course mine would not be anywhere as good looking ;)

Posted

sweet!!! i'm pumped for you! can't wait to see how you deck it out. 

 

i went with lee craft ZCI's when i first got my table saw because i had a big job that came up suddenly and i saw 0 time to make my own ZCI... since owning a handful of the lee craft i doubt i'll ever make my own that are that sophisticated for $22... 

Thanks for the tip on this. I know guys make their own, but I want to get something asap and these look great.

 

Oh man, so much to do, not enough time! I'm pretty jacked up. She was so nice. So happy to see it go to a good home, and was willing to knock off that $50 bucks no problem so I could get a proper insert and blade guard.  :)  She wants to make sure I'm safe! When I get a chance, I'll snap a few before and after pics. No time this week or coming weekend to play with it, but that's ok. I'll order some goodies this week and work on final assembly and tuning next week.

 

I already know I need to research how to clean the table surface. It's not rusty or pitted, but can use a decent cleaning/scrubbing.

Also up next... new blade (any suggestions?), a miter gauge, riving knife, ZCI, mobile base, some sort of dust collection assistance rig, etc... (a loud woooooosh sucking sounds is coming from the direction of my wallet already)

Posted

Should make for a solid performer for $400....congrats!  

Thanks man, I appreciate your feedback and comments. 

 

Everyone here has been so helpful with my antics. now to get 'er dialed in and cutting wood! (more questions to follow).  ;)

Posted

...Also up next... new blade (any suggestions?), a miter gauge, riving knife, ZCI, mobile base, some sort of dust collection assistance rig, etc... (a loud woooooosh sucking sounds is coming from the direction of my wallet already)

 

The ABCs of Picking Saw Blades

 

I've been pretty happy with the Osborne EB-3 and the Incra V27 (with a fence added).  I also really like the Leecraft phenolic inserts....other than a lousy smell when you cut them, they're darn near perfect as inserts go....stiff, flat, machinable, and strong.  The only aftermarket riving knife that I know of is the BORK, and I'm not sure if it'll fit the PM64a....you can always contact Bob Ross and ask.  The Sharkguard splitter might fit.  

Posted

 

 

Thnk you sir. I started that article a year or so ago when i got my first pos saw and got overwhelmed. I look forward to reading it with a new set of eyes and understanding now. The other tips are a great place for me to start. Putting that wish list together asap. 

 

Read quite a variety of reviews for the BORK, but looks like he's updated the design. Can't recall if it was his or the shark, but one of them fits. Also saw this little guy that looked like a allen key. tiny, but fits right into the insert. seemed light duty, but maybe it's just enough to really do the job of keeping the offcut away from the blade. 

Posted

We know what saw you have.....what's your blade budget, and what sort of materials do you work with most?

 

The article touches on several aspects of choosing blades, so break it down into digestable pieces.  It's not so different than picking tires....many of us have saws that would equate to performance cars, so the tires (blades) really make a notable difference.  The first few paragraphs of the article take you through 3 possible scenarios of which types of blades to choose....all purpose, task specific, or a hybrid approach.  Then it moves on to kerf width, and whether or not you need a stabilizer.  Next are tips for identifying good quality vs cheaper blades, and acknowledging that many manufacturers make multiple quality levels.  There's a section that explains how the saw, the setup, and blade all work together. And finally there's a section of several of the key design parameters in a blade, and the most popular types of tooth grinds.  

Posted

Thats a great article scott.

I figured out quickly that my arbor bearings and motor bearings are off. I quickly returned my forrest blades and freud ultimate plywood blade until i could get the motor to a shop and get a new set of arbor bearings.

I've been producing custom furniture for my clients since my discovery with a diablo 40 t and a skilsaw blade + cheapo dado.

My thoughts were that i didn't want to throw a nice, expensive re- sharpenable blade out of wack.

I'm just getting lazy at this point i've had more than a month of saw off time. Really need to get those bearings replaced

Point is, you can just get something simple to start and let your experience with the saw guide your blade choices over time.

I've never really entertained the idea of fitting a riving knife on my old saw. I just assumed it was not possible. The MJ splitter steel pro has been so awesome i just keep on using it. I cut a lot of reclaimed timbers and wany edge material. I only use the piece between the keeper piece and the fence. Plywood or any straight material is a piece of cake. My only reservation with the steel pro is making a non through cuts under 1" where a riving knife would be nice but i've never had or seen a kickback with non through cuts under 1".

If i'm cutting thin rips, i have confidence my off cuts are going to be safe because i have that solid footprint in my zci. If i had a riving knife i'd be nervous about it slipping through the cracks. This is a pretty minor circumstance though.

As for DC, there are quite a few contraptions out there for contractor saws.

I made my own shroud for the unisaw. It may work for yours. If you can, post a pic of the underskirt. I'd love to know if it works on other saws.

Sent from my thumbs

Posted

We know what saw you have.....what's your blade budget, and what sort of materials do you work with most?

 

Scott, great read! This time around everything made much more sense. I've learned a lot since I first tried to read that article, and it most definitely helps in my decision making process. Unfortunately I don't exactly have a "work with most" list. but looking at a few upcoming projects, it sounds like a general purpose blade will get me started. do you agree?

 

upcoming projects:

- plywood - workbench base cabinets

- craft storage/workstation for the house

- some small custom boxes (walnut and peruvian walnut)

- misc end grain cutting boards for gifts

 

 

 

 The MJ splitter steel pro has been so awesome i just keep on using it. I cut a lot of reclaimed timbers and wany edge material. I only use the piece between the keeper piece and the fence. Plywood or any straight material is a piece of cake. My only reservation with the steel pro is making a non through cuts under 1" where a riving knife would be nice but i've never had or seen a kickback with non through cuts under 1".

 

As for DC, there are quite a few contraptions out there for contractor saws.

I made my own shroud for the unisaw. It may work for yours. If you can, post a pic of the underskirt. I'd love to know if it works on other saws.

I've been looking at that MJ as well. Good to know you're having success with it. 

 

the underside of the 64a is pretty open (will snap pics during rebuild process). plus the open contractor style stand. DC will be something I need to figure out. Not sure if I'll be building some plywood enclosure, or just going with one of those snap on canvas bags. 

Posted

just googled powermatic 64A parts, looks like there is a plate that fits right on the bottom... click on image B and look for #6

no shhh. look at that. Thx. From the image I can't tell if that mounts to the lower or upper. I would hope upper, or else you still have 4 sides open. I need to order a handful of parts anyhow, what's another $16?! 

Posted

Can anyone tell me if i NEED to purchase an original insert? I read somewhere I would need that when I want to make angled cuts. I know that won't for with the ZCI in place (happen to find a brand new unused one on Clist as well!). 

 

Is this a must have? 

  • 2 weeks later...
Posted

excited to finally setup and tune the saw this weekend. Was rough to spend a bit more money than I was hoping - new insert, blade, etc.. but all that washed away when I saw a couple similar saws going for more than double what I picked this baby up for. Will post some pics of the progress. 

 

Spencer and McQ, thanks for the tips. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   2 Members, 0 Anonymous, 56 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined