t-bone Posted October 13, 2010 Report Posted October 13, 2010 hi, i was hoping that someone could give me some help. i bought a bosch 2 bladed hand planer,i can't afford one of those 6to8 type, is this a good choice and has anyone used one ? i hope am in the right forum Quote
PurpLev Posted October 13, 2010 Report Posted October 13, 2010 these are great for carpentry, and for trimming down doors. I would not use this to flatten/face/joint a board for fine woodworking projects though. be careful with it Quote
Ben H Posted October 13, 2010 Report Posted October 13, 2010 What PurpLev said. Power planers are not meant for fine woodworking. However, one might use one to semi-rough out a board in bad shape to try and save some time... I definitely wouldn't get too close with any expensive wood. Quote
PaulMarcel Posted October 14, 2010 Report Posted October 14, 2010 Pop Woodworking had an article by Toshio Odate maybe 3-4 issues ago about making a dining table out of a huge slab. The photos clearly show his apprentice leveling the slab with a power planer. Based on the color, Odate-sensei made a nod to his homeland and used a Makita. It's a 2" wide jointer in your hands. While I wouldn't use it in place of a smoother, I see no reason why you couldn't use one to flatten a panel that exceeds the size of your drum sander, planer, or jointer. Especially if you're putting a big bevel on it. Get close then fuss with the hand plane. Quote
t-bone Posted October 14, 2010 Author Report Posted October 14, 2010 these are great for carpentry, and for trimming down doors. I would not use this to flatten/face/joint a board for fine woodworking projects though. be careful with it hey thanks, iam thinking about getting a ridgid jointer/planer whats your thought on that its at the homee depot for 429.00 Quote
CubsFan Posted October 14, 2010 Report Posted October 14, 2010 hey thanks, iam thinking about getting a ridgid jointer/planer whats your thought on that its at the homee depot for 429.00 My thought is that it's currently $299 with free shipping http://www.homedepot.com/h_d1/N-5yc1vZ1xhf/R-100092374/h_d2/ProductDisplay?langId=-1&storeId=10051&catalogId=10053 I bought it but haven't have a chance to use it yet. A year or two ago, it did get rated Top value by wood magazine when it was priced at $420. Quote
samhell Posted October 14, 2010 Report Posted October 14, 2010 I have a guitar making DVD and all the guy uses is an electric hand planer. I thought it was crazy but it seemed to work for him. I use the Ridgid. I recommend it. Quote
alindsey Posted October 19, 2010 Report Posted October 19, 2010 I've been using the Rigid 6" for years and it's been a workhorse. The only quibbles I have are that the dust chute does get clogged on occasion and that Home Depot does not seem to carry replacement knives. I sent my original knives to be sharpened and wanted to pick up a spare set so I could keep working. Called my local store and they said emphatically that they had them. I even asked the guy to double check to make sure he wasn't looking at the disposable knives for their 13" planer. Nope, he tells me, these are jointer knives. Ok then! I got there, found the guy I had talked to and asked where they were. In typical Home Depot fashion he proudly presented me with a replacement cutter for a Ryobi biscuit joiner. (Home Depot: You Can't Do It. We Won't Help) So if you want to pick up a spare set of knives for the Rigid, I wholeheartedly recommend the set made by Freud which I found on Amazon. A lot less expensive than it would have been to buy a set from Rigid's parts department Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.