Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

GF water based dye stain on red oak ply

Featured Replies

Having some issues when finishing a shelf that is made with red oak ply.  The problem is, that the grain is not filling.  If I flood the surface, wipe off excess, it still leaves the grain full of little spots that aren't getting colored.  I also tried spraying it to see if it would make a difference, still the same problem.  Need to get this thing finished, and just looking for a solution.  Any help would be appreciated.  Thanks.

 

Sac

GF dye stain does have a small amount of binder. I'm surprised your having difficulty with that using a spray gun. Are you spraying and wiping it back? I would apply with light dusty coats, a no wipe application let the color build.

 

Are you going to apply a stain over top? Probably the glue has pulled up into the grain prohibiting take in. 

 

-Ace-

  • Author

I am not spraying and wiping back.  I did that on a previous project, but it wasn't ply, it was solid wood.  It did much better than the ply.  I am not going to apply a stain over the top.  I am going to use a seal coat of shellac and then give it a few coats of GF High Performance.  I am just using the Earlex 5000.  Not a huge fan, would like to step up sometime.  PB, what kind of binder would you recommend?  Ace said it has some in it, does it need more?  Thanks.

I am not spraying and wiping back.  I did that on a previous project, but it wasn't ply, it was solid wood.  It did much better than the ply.  I am not going to apply a stain over the top.  I am going to use a seal coat of shellac and then give it a few coats of GF High Performance.  I am just using the Earlex 5000.  Not a huge fan, would like to step up sometime.  PB, what kind of binder would you recommend?  Ace said it has some in it, does it need more?  Thanks.

 

Use the HP as a binder. Splash a small amount in the dye (the GF dye and HP topcoat are compatible) practice on some test pieces. Ratio is approx 25% HP to dye. Again the goal is to not spray really wet. Build the color. 

 

-Ace- 

I am not spraying and wiping back.  I did that on a previous project, but it wasn't ply, it was solid wood.  It did much better than the ply.  I am not going to apply a stain over the top.  I am going to use a seal coat of shellac and then give it a few coats of GF High Performance.  I am just using the Earlex 5000.  Not a huge fan, would like to step up sometime.  PB, what kind of binder would you recommend?  Ace said it has some in it, does it need more?  Thanks.

 

GF WB dyes dont penetrate worth a damn on some woods so you end up building on the surface. Any wb poly acrylic can be used as a binder to help you build faster. The issue you may have is that by the time you get the pours the color you want the surface may be to dark so try it out on scraps. If you want a sure fire method to get it in one shot without over coloring the surface use a lacquer stain. You dont need the shellac with either unless your looking to use the shellac for its color.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.