Janello Posted April 29, 2014 Report Posted April 29, 2014 Cut some new Zebrawood knife grips for a buddy with my OF1400. Quote
Rick A McQuay Posted April 29, 2014 Report Posted April 29, 2014 Swanky, really nice.Sent from my T-Mobile G2 using Tapatalk 2 Quote
Freddie Posted April 30, 2014 Report Posted April 30, 2014 Ugh, but the knife is made in china! Nice new grips! Quote
baok Posted April 30, 2014 Report Posted April 30, 2014 What's the finish?Sent from my iPhone using Tapatalk Quote
Janello Posted April 30, 2014 Author Report Posted April 30, 2014 Ugh, but the knife is made in china! Not all of it! What's the finish? 3 coats of Minwax semi-gloss fast dry poly. Quote
Janello Posted April 30, 2014 Author Report Posted April 30, 2014 Something worth mentioning. While doing this I found a flaw in the design of the Festool dust collection attachment. The dust shroud that is "clear" so you can see through it, isn't very clear for doing detail work with a 1/16 router bit. Festool incorporates a sliding window on the shroud but they chose to put it on the side of the router where the height adjustment spindle and plunge leg is! I had to modify a window into the side so I could actually see what I was doing! I want to write Festool and tell them that with all of the bells and whistles they threw at this design, they kinda forgot one important thing. YOU CAN'T SEE THE BIT! Quote
Janello Posted April 30, 2014 Author Report Posted April 30, 2014 I wrote Festool today and shared my thoughts (in a constructive way). I explained how I had to modify the aforementioned dust attachment because it was obstructing the view of my line of sight to the work piece. I got a response within minutes that said. "Thank you for your feedback. This information will aid in future designs". Nice to see them care enough to respond so fast. Quote
Janello Posted May 8, 2014 Author Report Posted May 8, 2014 Ned, I didn't take photos with the old grips attached, but the first pic shows the original grip next to the knife. If you look close you'll see my friend attempted to glue it by the screw hole where it had been broken when he dropped it. The knife is about 3.5 to 4" long. The pics are probably double the actual size. The slots that are cut are just a hair over 1/16 wide. They look a little jagged in the pic because it's "super imposed" The jagged edges are actually hardly noticeable to the naked eye. Quote
Ned Bulken Posted May 8, 2014 Report Posted May 8, 2014 love the figure on the new scales, definite improvement over the old ones! Quote
Janello Posted May 8, 2014 Author Report Posted May 8, 2014 Thanks Ned. It earned me a job making some gun grips out of Cocabola for a guy I work with. I know where to put my hands on a beautiful hunk of it, but I need to make time for an hour drive. Quote
Coop Posted May 8, 2014 Report Posted May 8, 2014 Janello, First, great looking grips and nice choice of wood. Second, and I've seen them called that on e-bay, why do they call the wood for the grips, scales? Quote
Janello Posted May 8, 2014 Author Report Posted May 8, 2014 Thanks Coop. I didn't know they were called scales. Good to know though. I guess I made scales! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.