Steve Lyde Posted May 16, 2014 Report Posted May 16, 2014 I have had a Kreg router table with a Triton router for several years and I have never been completely satisfied with it, so out with the old and in with the new. I bought into the complete Incra system including their stand and built my own cabinetry full of drawers into the Incra stand. I bought the 43" wide stand and top with the with the 17" super system fence. I also went with the Incra Clean Sweep enclosure and Clean Sweep Maglock ring set along with the Incra Master lift and Porter Cable 7518 motor. I built cabinetry with drawers into the Incra stand which was a little more of a challenge than I had thought it would be. You MUST make sure you assemble the stand completely square so that your cabinetry and drawers will work well. I thought I had is square the first time but found out otherwise as I started to build the cabinetry for it. The side and back panels are 1/2" baltic birch ply and the face frame is solid maple, still using up scrap maple from my Roubo work bench. The drawer sides are made from 5/8" pine and dovetailed using the Incra system, bottoms are 1/4" birch veneered MDF, and the fronts are 3/4" solid maple. If you have looked into the Incra router system you know they come with several templates for the different dovetail and box joint patterns. I wanted easy access to these templates but hated to give up an entire drawer to something that won't be used each time I use the router.........so I came up with the idea of a template holder on the end of the table which also houses the instruction booklet. This was made from 1/2" MDF trimmed with solid maple and maple veneered MDF. It offers easy access yet out of the way when not needed. I have enjoyed the Incra system so much I have now even added a 32" Incra fence system to my table saw. 2 Quote
Tom Crawford Posted May 16, 2014 Report Posted May 16, 2014 I have the Incra table saw fence - you will like it just as much as the router table fence. Quote
..Kev Posted May 16, 2014 Report Posted May 16, 2014 Very nice work Steve! A great set up for sure! Quote
Nestor Posted May 19, 2014 Report Posted May 19, 2014 Nice job ! Nice Yammy in the background too. Sent from my iPhone using Tapatalk Quote
tim0625 Posted May 19, 2014 Report Posted May 19, 2014 I have the Incra Table saw system and the router system. The sting of the investment will definitely subside as you use it and you'll always be glad you invested in it. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.