Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Cherry Blanket Chest

Featured Replies

All these various chests inspired me to build my own. Thanks guys.

This is my starting point and we will see how it evolves.

http://www.finewoodworking.com/woodworking-plans/article/blanket-chest-by-hand.aspx

Started by milling a couple boards from my stash of cherry.

Edge cleanup with the LN LA Jack

a5ava7ug.jpg

Either the front or back panel glued up and in clamps. Not sure which it is yet....

ede6u7a9.jpg

Clamps off and squeeze out removed.

gyqadeta.jpg

Hope to get another panel or two glued up tomorrow.

My joiner does not like this cherry. It has some figure to it and it tears out like crazy. My planer is cleaning it up nicely though.

  • Replies 52
  • Views 12.6k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Sweet!  Hope you got some tape on those boards

  • Looking really good!  Grain match looks great

  • I hope everybody realizes we just spot things that have circled around and bit us in the butt. None of us are trying to pick on ya. Damn 3rd one to spot it.

  • Author

3y8aryby.jpg

Got the first panel smoothed out. Cleaned up the glue lines.

9aheru5u.jpg

The 3 other panels are glued up as well.

Not sure how I like my board alignment. I always second guess myself trying make them look good.

I have few boards partially milled for the top but don't think I will use them. Going to wait and do the top last. Need to look through the pile and find a couple Great boards for the top.

Get these glue lines cleaned up and I will be ready for dovetails.

  • Author

It was a bit of a process this week to get anything done. Ended up building a big cross cut sled, didn't have a way to accurately cross cut panels on the new table saw.

Got the all panels cut to size. Glue lines smoothed out.

Ready to lay out the joinery.

mumy5apa.jpg

Looking really good!  Grain match looks great

I agree with Tiods. You won't be able to tell where those glue lines are at, that's for sure! I am building a cherry TV stand myself. I love working with cherry.

  • Author

I spent a lot of time trying to match grain so I am glad it paid off! Cherry is just a wonderful wood to work, it also smells so good!

  • Author

Made some progress since the last post. Joinery all laid out.

Cutting pins with my improvised vise. My workbench stinks. Need to add that to the project list. It is heavy though so as long I can figure out a way to hold the work piece I am good.

tyqeteru.jpg

I cut all the pins, which was a nice arm workout.

First set cleaned up, 3 more to go.

busuhade.jpg

  • Author

Just realized that I screwed up the layout of the pins on this corner, it was the only one I messed up.  Lesson....quadruple check your layout!  Not terribly upset, did this side first because the knot I was trying to incorporate was a little more gnarly than I thought.  

 

I will just make a new panel for this side.

 

Live and Learn!!!  On to the next mistake!

Josh, maybe you should look into a moxon vise. I don't have one…YET. But for the price, it would be a nice addition for your bench it looks like.

 

You can even look into making your own hardware. I have seen a couple people go that route.

  • Author

That would be a great addition! Made some improvements to my improvised version. Works pretty well for now.

Off to mill the lumber for my replacement side panel.

  • Author

Milled the boards 1/2 way for my replacement piece this evening. Going to let them sit for a few days.

  • Author

Decided to just cut off the pins I laid out wrong and just adjust the size of the chest.

Got all the pins done today. Working on laying out the tails.

Also trying to visualize how this mitre at the bottom corners needs to be cut.

bagyryre.jpg

If you're happy with the change in size then, good on ya!  Had you not said anything to us, nobody would know.

  • Author

Wanted to use two wide boards for the top. Made a quick and easy sled for my planer.

vuhyvu4u.jpg

Partially milled pieces for the top.

haty2u9u.jpg

Later today going to clean up tails and make up a sample joint to practice the mitered corners.

  • Author

Wife and kids are gone today so getting some shop time.

Chopped the tails still have to fine tune. But can't do that until I get the mitered corners done.

jyty5a7y.jpg

A few pics of my progress.

y3avypan.jpg

e9u7ymud.jpg

yje5uzu7.jpg

Here is the test joint I made to figure out how to cut these miters. One side can easily be cut on the table saw. The other is a little more tricky.

Still not confident how these are going turn out. I hate miters!

yvu2y7ej.jpg

  • Author

Alright think I am done for the day. Got a lot done but I am tired. Got the bottom laid out and cut. 1/2" material I resawed on my bandsaw. Think I have the tongue and groove and shiplapped joinery figured out.

I used leftover off cuts for the bottom. It all matched pretty well except that far board. It looks worse in the picture than it really is. It has some crazy grain. Cant see using more material for part that will never been seen.

jeqepy9e.jpg

Holding off cutting those miters until I think about it some more.

I would like some opinions on the top. Not thrilled with the look of the cleats but need something to help hold it flat. Maybe I just don't want to cut that dovetail socket! I could do breadboard ends, not sure how that would look? Thoughts?

Planning to put some nice strap hinges on it!

  • Author

So if I go with breadboard ends here is what I have on hand. I could make them out of Cherry, Mahogany, or Walnut. Leaning towards the walnut but once the cherry ages it might look good with the dark brown/red mahogany.

Edited by JoshC1501

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.