Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

My amazing wife said go ahead

Featured Replies

  • Author

I checked on the jointer at Grizzly and it's back ordered until January..... Oh well

http://www.grizzly.com/products/8-Jointer-with-Parallelogram-Beds/G0490

 

This is the jointer that I have. I think for the $100 or so dollars, the parallel jointer is a little better option. Not that it makes a HUGE difference, But the indeed/outfeed tables are 4 inches longer than the non parallel jointer you were looking at. I absolute LOVE this jointer. The only thing I have to compare to is a bench top jet, But this is hands down the best tool I own.

  • Author

I found a great deal on a used Jet jointer. (Craigslist) I bought the Grizzly spindle sander and Jet drill press online. The sander comes to day and the DP comes tomorrow. I just went for the bench top drill press cuz I just couldn't come up with enough projects or valid reasons to get the floor model.

  • Author

Thank you! Now I feel I can focus on just buying the tools needed per project which should (I said should) be cheaper bits.....

  • Author

My Jet drill press came yesterday and after dinner spent the 15 minutes and put her together. My only trouble is with the Grizzly spindle sander. I just can't get one sanding sleeve over the rubber insert. Any suggestions? I don't want to force it but more importantly I want to be able to get it off when I need to replace it.

I have one of their sanders and haven't had any issues like you describe.  

 

My suggestion would be to call Grizz and have them send you another.  I've found them to have great customer service.

Try putting the rubber sleeve in the freezer for awhile. It should contract enough to get the sleeve on it. I've had to do this occasionally to get the sanding sleeve off.

There should be a nut on the top of the spindle that you can turn one way or another to expand or contract the rubber drum.

  • Author

Kiki I'm just trying to slide it on in my hands not on the shaft. I was thinking about the freezer idea so it's funny you mention this butcher....

If you bought the 0739 spindle sander, it has the nut at the top of the spindle, which will expand the drum the tighter you make it, locking in the sleeve.  Check your manual and I'm sure you'll see that in the sleeve-changing section.  If you can't get the sleeve on with the drum completely off of the unit, then something might be wrong.  I have a different model Grizzly spindle sander, and my sleeves come off and go back on with ease when the nut is loosened, and they lock on slip-free when the nut is tightened.

  • Author

I put the rubber sleeve in the freezer and then it slipped right on.

Not agreeing or disagreeing with any of the opinions offered. Just wanted to add my own experience in getting a drill press. I had a budget and got a bench top model that works fairly well and does most everything I ask. If I had it to do over again I would've held off a little bit and got a floor standing model, just for the extra depth. Makes a huge difference when you're cutting mortises in wide planks or in thick table legs. I've rigged some work-arounds where I swing the table out of the way and then build up from the base with planks to a working height but I would much rather done it the easy way.

Completely agree! I was "fortunate" that my Home Depot Ryobi bench press motor burned went out on me after a couple of years...and I got a really nice floor standing Rikon for about $300 on Craigslist. I also think it's nice to learn on lower quality tools, so you really appreciate it when you upgrade to better tools.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.