Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

My amazing wife said go ahead

Featured Replies

I'm trying to get the last things as far as larger tools to get me by for as long as possible. Thinking like the mechanic I am, I need quality and long life.

What I'm looking to get is a drill press, oscillating spindle sander, and if money allows a jointer. My end goal I should state is cabinets, clocks, and furniture. (Way down the road beginner here)

Throw any suggestions at me I'm not in a hurry.

Spending the money on a jointer and for the drill press and OSS just get the budget machines, if you are just starting.     You want the best jointer you can afford. 

I agree with Mike. I bought an 8 inch grizzly jointer and absolutely love it (Although I know there are better machines out there) It was such a huge improvement over the jointer I previously had. For me, I barely ever use a drill press. I would probably put that somewhere at the bottom of the list. I don't have a spindle sander, but I always wish I did. I know a lot of people absolutely love the rigid spindle/belt sander and I believe its only $200

If you use dimensional lumber, I'd put the jointer at the top of the list.  There are reasonable alternatives to drilling holes and sanding, but nothing comes close to the efficiency of flattening and straightening aboard like a jointer. 

Since you're a mechanic, I'll go contrarian: used stationary equipment...

 

Lots of folks enter woodworking every year, and many more exit... There is plenty of quality gear on the used market and, as a mechanic, you shouldn't have too many problems that you can't solve... I also make this recommendation based on your project goals: Cabinets, clocks and furniture. These will eventually lead you to a fairly full shop and, not knowing your budget, the used market may get you there faster... The third reason I suggest used: every mechanic I know is meticulous (read as anal) about his/her tools... Again, not knowing your budget, you may get the quality you want far more readily on the used market. I know people get passionate on these debates, but there are real differences in quality out there... Not all of them justify the price premium, but... I know everyone can't afford a Snap-on toolset, but I'd rather have a used set from Snap-on than a new set from Husky...

 

As for which tool first? Well there are plenty of threads discussing the pros/cons of every conceivable procurement hierarchy -- lot's of good advice already out there...

    +1 with 4-square.....Buy good used... being a wrench, the mechanic's of them will suit your abilities to repair.  Dimensioning wood will be a priority, so go table saw, jointer, planer then add the lesser tools as needed.  A bandsaw should also be considered, since it can do some of the same things a table saw does.   But flat and straight are going to be the most important, and, by the way.....welcome to the world of sawdust!

Not agreeing or disagreeing with any of the opinions offered.  Just wanted to add my own experience in getting a drill press.  I had a budget and got a bench top model that works fairly well and does most everything I ask.  If I had it to do over again I would've held off a little bit and got a floor standing model, just for the extra depth.  Makes a huge difference when you're cutting mortises in wide planks or in thick table legs.  I've rigged some work-arounds where I swing the table out of the way and then build up from the base with planks to a working height but I would much rather done it the easy way.

This thread is similar to another...

 

Follow Kev's advice...get the jointer.  8" if possible.  Drill press comes later.  Yes it's great to have it when you need it, but a jointer is used on EVERY. SINGLE. PROJECT.  Often multiple times.  It's the first step in the process of nearly every build, so you'd be wise to make it a priority.

I have a budget bench top drill press, and when I received a floor model drill press, I kept both.  The bench top DP is good performer  and it comes in handy if I need to dedicate one to a specific job.

 

I saw a couple mentions of the Ridgid OSS/Belt Sander.  I have one and love it.  I think it is one of the best bangs for your buck out there.

<If you have a wife that says "go ahead" to a tool purchase, you are blessed indeed>

just beware the new opportunities for honey-do list expansion...

She may be saying "Go ahead" to your expensive tool purchase, because she doesn't want you fussing about her upcoming shoe, and purse shopping spree she is planning  :P

  • Author

I'm very lucky in that my wife gave a true go ahead. In making my chairs I could have used the jointer and sander and there are projects that need the use of a drill press I just don't/want to buy too little or too much.

  • Author

I guess I should explain. I don't want to buy more tool then I need right now but I'd like to get a great deal and not buy tools I'll replace in six months.

<I don't want to buy more tool then I need right now but I'd like to get a great deal and not buy tools I'll replace in six months.>

Of course this is not a unique requirement... Every woodworker would like Altendorf to hold an annual holiday sale on F45s for $99.95, but it ain't going to happen...

 

I think we may be down to brass tacks --- since everyone else is too polite to ask, I'll be the goat... How much do you want to spend? and How much are you able to spend?

 

With these two numbers, members can help you zero-in on a procurement strategy... If you say $30K, that's going to lead you down one path... If you say $3K, that's another and if you say $300, then we'll advise you to build decorative boxes with hand tools and/or adopt a different hobby...

  • Author

Thank you 4 for being upfront and sorry for not being clear. $1500 is the most I'd like to spend. So I looked and read about the Ridgid oscillating sander so how bout jointer and drill press?

Do you have 220 available or are you limited to 110?

 

I apologize if this was answered earlier..

Here's some options for you based on your budget - I did 2 as I wasn't sure if you had 220..  

 

220 set up

 

Jointer - $845.00

http://www.grizzly.com/products/8-x-72-Jointer-with-Mobile-Base/G0656

 

Drill Press - $395.00

http://www.grizzly.com/products/12-Speed-Heavy-Duty-14-Floor-Drill-Press/G7944

 

Spindle Sander - $129.99

http://www.grizzly.com/products/Oscillating-Spindle-Sander/G0739

 

Total: $1369.99 Plus tax and shipping

 

110 set up

 

Jointer - $785.00

http://www.grizzly.com/products/6-Parallelogram-Jointer/G0604X

 

Drill Press - $395.00

http://www.grizzly.com/products/12-Speed-Heavy-Duty-14-Floor-Drill-Press/G7944

 

Spindle Sander - $129.99

http://www.grizzly.com/products/Oscillating-Spindle-Sander/G0739

 

Total: $1309.99 Plus tax and shipping 

  • Author

Well the 220 is for my table saw and air compressor but yes I have 220. And just to clarify deeper here's what I have by means of new, craigslist, and my bro in law.

PM2000

Dewalt 13" planer

3 routers

12" Jet bandsaw

Dewalt 12" SMS

Trying to get the last of the root needed main tools.

There's no such thing as "more tool than I need." :)

Unless it is a drum sander that takes up half your shop.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.