trz Posted September 27, 2014 Report Posted September 27, 2014 Anyone know where to get an aftermarket magnetic on/off switch? 220v 18a 1ph 3 hp motor Quote
Firehawk Posted September 27, 2014 Report Posted September 27, 2014 http://www.amazon.com/Woodstock-D4157-Single-Phase-Switch/dp/B005W17GZE/ref=sr_1_16?ie=UTF8&qid=1411824948&sr=8-16&keywords=magnetic+switch Quote
trz Posted September 27, 2014 Author Report Posted September 27, 2014 Although it's not a magnetic switch, I was considering this simply because of the price. Quote
Tpt life Posted September 27, 2014 Report Posted September 27, 2014 Do you mean remote? Packard C240A 2 Pole 40 Amp Contactor 24 Volt Coil Contactor https://www.amazon.com/dp/B003U7Z8Q6/ref=cm_sw_r_awd_-NSjub1HB0X3K Quote
mikem Posted September 27, 2014 Report Posted September 27, 2014 For machine switches in general, Grizzly has one of the best selections out there: http://www.grizzly.com/products/category/275010 Quote
minorhero Posted September 27, 2014 Report Posted September 27, 2014 If you don't mind used, ebay works pretty well. Quote
Beechwood Chip Posted September 27, 2014 Report Posted September 27, 2014 There's always McMaster-Carr. Quote
trz Posted September 28, 2014 Author Report Posted September 28, 2014 So, none of my contracter saws have had magnetic switches is there any real reason I should have one on my 3hp cabinet saw? Quote
Beechwood Chip Posted September 28, 2014 Report Posted September 28, 2014 I may be wrong, but my understanding is that magnetic switches are used in professional shops and factories. If there's a power failure of someone hits the big red button, all the tools will turn off. But, with a regular switch the tools will still be "on", so when power is restored you've got stationary blades suddenly start spinning with no warning. If the work piece was left in place. or some thing was left on the "off" tool, you can get kickback. The magnetic switch turns off when power is removed. So, I guess you want it where you have a big red button, or for any tool that might be turned off by pulling the plug or with an additional switch. Quote
wtnhighlander Posted September 28, 2014 Report Posted September 28, 2014 Another advantage of magnetic starters is that they can be built to handle large loads without requiring a huge external operating mechanism, since the actual load switch contacts are opened and closed by an electromagnetic solenoid. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.