Recommended Posts

Posted

not celebrity death match time but a comparison would be nice.

 

I have a toothed blade for my LN low angle jack and want to know what the pro and cons of it are versus more 'traditional' heavy removal tools - i.e. a scrub plane and a #5 Jack with cambered blade.

 

TIA,

Tony

Posted

I've not used a toothed blade (I'd meant to make one, but Home Depot keeps being out of the buck bros $2 plane irons I've been planning on using), but I do have a scrub and a cambered jack.

 

The scrub is actually a bit hard to use in hardwood if you put the blade at a depth that would use the full width, but you can use it on softwood like this to plane off extremely thick pieces very quickly.  On hardwood with it I usually just don't try to sink it all the way in.  The cambered jack is similar but is easy enough to push through hardwood at full camber depth.  If the grain is straight you'll hear a zip sound and be peeling off very thick layers of wood that will wrap around your forearm.  LN has some videos demonstrating their scrub plane on youtube that show this.

 

Most people will say you don't need a scrub and they're right, but I like having it around.  For the jack I'd buy vintage, no need to get a new plane to use it like this.  I kept the original blade straight and used one of the aforementioned $2 irons to make the heavy camber blade and it works very well.  I level off the scrub/jack furrows with a #6 that has a small camber, but you could probably skip straight to your jointer if you wanted. 

Posted

I don't really think it matters Tony. I don't think that one eclipses the other or makes the finished work better. I personally don't need a scrub and unless you have mild timber to reduce in size crazy quick then I'm not sure how they fit into typical workflow. I would only bother with toothing irons if I had really figured stock but being honest there aint much a Bailey or Wooden plane won't deal with.

  • Like 1
Posted

I agree with Graham.

I have a scrub, and it's only seen use a few times.

As far as toothed vs heavy cut from a #5, the toothed blade will reduce tearout much more than the 5.

This is one of those things that completely depends on your workflow. If you want a scrub I'll sell you mine.

  • Like 1
Posted

I have a vintage #5 but the USPS broke the handle and bent the brass threaded rod inside - it's a union not a Stanley. Haven't gotten around to finding another one. I've got the toothed blade so I was just wondering how useful it would be instead. I guess another option would be to get another blade for my #4 and giving it a more aggressive camber.

Posted

You could easily make a new handle and may be able to straighten the brass rod if you're lucky, if not I'd contact Don at timetestedtools and see if he has any parts.  Should be a pretty easy repair all in all. 

Posted

Don's actually who I bought it from a while back.  He sent me a new handle but didn't have another rod at the time.  Maybe I'll see if he does now.  It works really well - just kind of a pain to use without a tote. (senior moment - totes the handle on the back right?)

Posted

A toothed blade is not in the same category as a scrub in my book. The toothed will not remove stock nearly as quickly as the scrub. The tooth can help with gnarly grain as has been mentioned. It can also leave a profile desired in some applications. They are both "rough" removal tools, but with different meanings of "rough." Like has been said, with relatively tame timber, a jack is usually plenty aggressive with a tooth reserved for the tricky.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   0 Members, 0 Anonymous, 65 Guests (See full list)

    • There are no registered users currently online
  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined