estesbubba Posted January 31, 2015 Report Posted January 31, 2015 My UTS has a 24x24 router table section. Eventually I will build a dedicated router table but don't know when. For now I would like to find a steel base or something to put it on and move my UTS. Any suggestions on what to do? I would like the UTS in a different location and why looking at options. Quote
wdwerker Posted February 1, 2015 Report Posted February 1, 2015 UTS? I hate all these abbreviations ! Mainly because they pop up faster than I can remember them. 1 Quote
Janello Posted February 1, 2015 Report Posted February 1, 2015 You can make a quick metal stand thats strong and sturdy with any dimensions you want using 1 5/8" unistrut. There are 2 hole and 4 hole 90's, 45's and tee plates available. A good plumbing supply or possibly home depot has all of that. Quote
estesbubba Posted February 1, 2015 Author Report Posted February 1, 2015 This might do the trickhttp://t.harborfreight.com/universal-tool-stand-69805.html Quote
Brendon_t Posted February 2, 2015 Report Posted February 2, 2015 This might do the trickhttp://t.harborfreight.com/universal-tool-stand-69805.html I use this exact stand from hf as my do all. I laminated two sheets of 1" ply with about 3" of over hang and use it to support my bench top planer, compound Miter saw, bench top router table, bench top jointer etc. I simply aligned everything once, drilled the holes out where the tool connects, sank a nut into a counter sink with epoxy on the bottom. When I set a tool on there, I spin in 1.5" bolt with butterfly top and it secures fast and tight. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.