Ronnie Boyett Posted March 3, 2015 Report Posted March 3, 2015 Does anyone know if there is a Biesemeyer type fence for a Craftsman table saw (Model #137218300), or how I can find this information. Before anyone feels the need to tell me this is an old,cheap saw, I KNOW, but this is my saw and I would like to make it better if possible. I cannot get the fence (cheap) that came with this table to lock down perpendicular to the blade, very close but not square. Thanks for any help. Quote
Tpt life Posted March 3, 2015 Report Posted March 3, 2015 I have never used a true Biesemeyer. I have purchased and installed a Vega Pro and truly like it. As an after market fence, it comes with instructions to help drill and tap for your particular saw if needed. Quote
Woodenskye Posted March 3, 2015 Report Posted March 3, 2015 I have the vega and it is a really good fence. There was a video of a guy putting it on a craftsman saw. Quote
Joshua Luther Posted March 3, 2015 Report Posted March 3, 2015 I made my own homemade t-square, beisemeyer style fence for my Craftsman Contractor Table Saw. Cost me $0. Quote
wdwerker Posted March 4, 2015 Report Posted March 4, 2015 + 1 for Vega ! 20 plus years in my pro shop and still going strong ! Quote
knotscott Posted March 4, 2015 Report Posted March 4, 2015 Most aftermarket fences are made to mount to full size cast iron saws. Not only would many of them weigh more than your saw, but you'll have a tough time mounting most of them to a smaller saw, unless you build a workstation around it, and mount the fence to the workstation. One of the best upgrades you can do for any saw, is to put a decent blade on it. I'd stick with one of the better value blades from the Freud Diablo line, Irwin Marathon series, CMT ITK Plus, or DW Precision Trim series. They start just < $30. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.