Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Live edge maple and oak box plus some ?'s.

Featured Replies

Just finished the live edge maple burl and oak box. While I like the design I've had a few issue's. How are other people attaching wood hinges to their projects? Can I use just regular 2 part epoxy to fill knots and checks ( seems too thick to flow into the gaps )? The Burl wood is old and Spalted and just soaks up either Danish oil or poly. Could probably soak up a whole can of either of these. Any suggestions for an alternate finish?

post-16187-0-39542700-1425855760_thumb.j

post-16187-0-94256300-1425855782_thumb.j

post-16187-0-47458300-1425855798_thumb.j

I really like the design of your box. Very original!

As for the hinges, I really don't have a valid answer. If the box was large enough to drill and screw from the inside, that is what I would do. However, being a small box builder myself, I know that is not always possible.

My favorite hinge design for small boxes is what I call the "finger joint method". I've used it on a jewelry box and this smaller box.

 

Cherrybox005_zps887f2f8b.jpg

 

Cherrybox003_zpsde883560.jpg

 

A 1/8" x 6" long drill bit and a piece of 1/8" brass rod and "Bob's your uncle"!

 

Rog

My experience with the two part epoxy (West Systems) is that it does seem awfully thick, but just don't damn up the back and sides and you'll find as I did, that stuff flows into every little crack. Use blue painters tape for the damn and I thick you'll find that it will fill your voids fine.

 

Great looking box. I would like to see a couple of more pics with the lid open.

 

Roger, Neat looking box as well.

Nice boxes both of you. Don't have an opinion as to the glue, but I would think epoxy would fill Ok?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.