Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

static from planer

Featured Replies

here is a picture of my set-up for my palmer with dust collection, works great but I'm getting so much static I'm afraid to go near the thing when its running, pulls the hair on my mustache out at 2 feet away. what would be a good way to deal with this problem? thanks to all

post-17217-0-46090500-1429451692_thumb.j

Have you installed the grounding kit that came with the dust deputy? Seems a good place to start.

  • Author

no grounding kit included, just bought the plastic deputy and put it on the trash can, maybe they forgot to include the kit?

Did you but the DIY kit (just cyclone) or the boxed kit with the buckrts , hose, and casters?

I have the boxed kit, and it came with a grounding kit, not sure about the DIY version.

  • Author

 bought just the cyclone franklin, no thing else included,   they figure I'm smart enough to figure it out, I'm not :blink:

I did a quick google, and there seems to be variety of ways to ground the DD without the included kit.

I would def ground it - that should help a lot. Do a Google search for "grounding dust deputy" under images.

Those Craftsman vacs are notorious for static. Anti static hoses can be had but they aren't cheap. Grounding as much as possible is a smart idea .

You can get some grounding braid from McMaster-Carr for about $15/500ft… Ground-tape is about $10/50ft… Here’s a photo of a DIY UDD grounding setup -- while not exactly apples-to-apples, you can get the idea...

 

 

 

 

Note: The grounding braid is run from the tool, through the hose, across the DD, etc.. For the length of non-anti-static hose, I run the wire inside the pipe… I use grounding foil and hose clamps at each junction to keep good grounding contact. You'll have to check if your vac is grounded or not -- you've got a volt/ohm meter? If grounded, that's great.. If not, we can add a ground...

Those Craftsman vacs are notorious for static. Anti static hoses can be had but they aren't cheap. Grounding as much as possible is a smart idea .

 

I use my Craftsman to vacuum out my DC filter bag and I have to use a grounding strap on myself or I get seriously shocked.  Even with the grounding strap, I can still feel the current in my fingers that are holding the bag.

 

Slightly off topic, does the Craftsman keep up with the chip ejector on the Dewalt?  Before I had a DC, I used a Craftsman on my Dewalt planer and it ended up pressurizing the Craftsman enough to separate the top from the barrel a bit.

  • Author

the craftsman keeps up, but i have to start the planer first then the shop vac, the rubber gasket on top of the trash can makes such a good seal it sucks the trash can sides in unless the planer is started first

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.