Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Job site tablesaw recommendations?

Featured Replies

If you get a cabinet saw, just think of all the great, innovative, beautiful storage solutions you can make to get all that other stuff out of the way and make room for said saw.

  • Author

Well, that's how I'm justifying going from the job site saw that I started the thread about :) I've picked up the ridgid saw, so we'll see how it goes. I'm excited, though. New table saw day!

Sent from my Nexus 5 using Tapatalk

  • Author

post-17761-14337171923_thumb.jpg

Well, I didn't get as far as I hoped with assembling the new saw, but I should be cutting with it soon. Unfortunately yard work ate up most of my day, although I at least managed to get it upright so I can finish it in the evenings this week.

Sent from my Nexus 5 using Tapatalk

Congrats on your new arrival. I hope all goes well with it.

You know what time it is? It's new sled time :D congrats on the new saw!

  • Author

Thanks, guys. It IS time for a new sled! At least once I get my hands on some decent plywood, anyway. I'm pumped to cut something on it.

Sent from my Nexus 5 using Tapatalk

  • Author

0ff0a44973ca8323504fc7ca1da78212.jpg

I only had about a half hour last night to continue with the saw, but I got the rails initially mounted. I still need to finish getting everything aligned and level. The split rail ended up being easy to join if I held it vertical, so the weight of the rails pushed them together.

With any luck, I'll turn it on tonight, or tomorrow at the latest.

Sent from my Nexus 5 using Tapatalk

  • Author

2d84a4732e87573892d1e5dbd0c5e94d.jpg

It's assembled! Leveling the tables and rails was a pain, but it could have been worse. Boy, that saw is sure smooth running compared to my old one (and quiet too). I didn't have time to cut anything after getting it together, but I'm looking forward to trying that tomorrow night.

  • Author

Yeah, the foot pedal engages the casters. In my picture, the saw is lifted up so I could push it out of the way. Normally that pedal is flipped up when the saw is down. The built in lift on this saw works pretty well, although part of it came assembled upside down from the factory. Fortunately, I wasn't the first one to see that, so I was expecting it might be an issue.

Sent from my Nexus 5 using Tapatalk

  • Author

Yes, it does. As it's set up right now, there's about a 1/16 gap between the bottom of the fence and the table. There's a notch in the back fence bracket that rides on a ridge on the rear rail. It didn't want to glide smoothly until I rubbed a little wax on the rails, now you can push the fence and it will slide quite nicely.

I fired it up and cut some plywood for a straight line ripping jig on it today. It's such a smooth cut compared to what I'm used to, even with the stock blade. I think the biggest difference is the sheer mass of the saw, along with the riving knife keeping the cut clean. Is it wrong that I probably could have been quite happy ripping little strips of plywood out there all night? :)

Sent from my Nexus 5 using Tapatalk

Yes, it does. As it's set up right now, there's about a 1/16 gap between the bottom of the fence and the table. There's a notch in the back fence bracket that rides on a ridge on the rear rail. It didn't want to glide smoothly until I rubbed a little wax on the rails, now you can push the fence and it will slide quite nicely.

Sent from my Nexus 5 using Tapatalk

my fence is set up the same way, makes building an out feed table a pain.
  • Author

I can see how it would. My fence rails have t track slots in the bottom, so I'd probably use that if I was going to make an out feed table. I'm limited on space, so likely for now I'll just keep using my roller stands to handle that.

Sent from my Nexus 5 using Tapatalk

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.