Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Stand up paddle board build

Featured Replies

It started as a kit, but was a good skill building project. I wasn't going to journal this but I think on reflection that others may be interested even if it isn't a traditional woodworking project.

(Removed bad link)

Sent from my iPhone using Tapatalk

  • Author

Must have hit backspace. Here's the initial kit: a bunch of precut Okolume plywood, hardware and a gallon of epoxy and hardener.

b6bd77c287f9c4e0d7f5b6db46571fd8.jpg

Sent from my iPhone using Tapatalk

  • Author

Gluing together two panels to make one long one. The end dimensions of this is 12 1/2'.

36bec0dc82e4aebf386d650baa77356d.jpg

Fibreglassing the inside of the top deck. Everything needs to be water tight.

4f08055745ae370bd8c46ddbc4e1839d.jpg

Sent from my iPhone using Tapatalk

  • Author

After building my Ruobo, I'm still hesitant about making a mess on the top. Lots of plastic sheeting over everything.

Sent from my iPhone using Tapatalk

  • Author

Adding some reinforcement to the side rails. Eventually the top will sit flat on top after leveling them out.

287dbea9723f35e1b0b748c9866b3667.jpg

Bulkheads are attached by stitching them to the side rails with some copper wire through predrilled holes.

219e2b27477b9ae5ea7863bab3ea0bcd.jpg

Sent from my iPhone using Tapatalk

  • Author

Note the fancy clips: short sections of PVC cut down the axis. Much cheaper than buying a bucketload of spring clamps.

Sent from my iPhone using Tapatalk

  • Author

For the record, I have been working on this since April 30th.

Sent from my iPhone using Tapatalk

That looks pretty cool!  Good idea with the PVC

  • Author

Stitching and gluing the bottom to the bulkheads and side rails. After which, you epoxy them all together. Once done, you remove the wire stitches.

ae69306df0554a5e081eba65307eb2a4.jpg

Then thickened epoxy using wood dust to fortify the glued up parts.

84a974b7412daa6ec3f7f296d301fbb3.jpg

Sent from my iPhone using Tapatalk

  • Author

Stringers were added and everything coated with epoxy to protect against any water.

Sent from my iPhone using Tapatalk

For having started it in April, you sure got a lot done today

  • Author

I epoxied myself to the floor so I had no choice but to keep working on it.

Sent from my iPhone using Tapatalk

  • Author

Attaching the deck to the rest. More epoxy and a load of weight to secure it.

12693192c97578d1dcce9bab3d2547f4.jpg

However. I didn't let sleeping dogs lie and tried shifting things around in this state. After enough cure time had passed I tried adjusting a clamp and the whole setup fell down 4" when the supports broke.

cba4854392156bb1258c8f9169295b45.jpg

Cracked the side rail and put a gash in the bottom. CA glue to the rescue. Reminiscent of my dog hole block on my workbench when I dropped that to the floor and put a nice crack through it.

b122047bfbeb897dfba85ecfa966fd90.jpg

Sent from my iPhone using Tapatalk

  • Author

With the amount of weight I used to secure the deck. I should have reinforced the supports I was using. They were made of the same 3/16" plywood as the board itself.

Sent from my iPhone using Tapatalk

  • Author

Flush trimmed the deck to the rails.

d73e765138e6cd76b8eea492d44c64f5.jpg

744a31c5b303e3f241e4e1301d49446b.jpg

Some nice curl in the front portion of the deck.

7749d5bf47f64261ce41bc8d7101348c.jpg

Sent from my iPhone using Tapatalk

  • Author

Adding in some inlay. I didn't make the medallion, just installing it. Would have liked to have had a router plane for this task.

b9c5c4b50666029107c22d1a621b9122.jpg

Prepping the bottom for fiberglassing. Filling in the holes and sanding smooth.

d6c03ea1bc0e16072b0ee70eeb0e155e.jpg

Sent from my iPhone using Tapatalk

Do all SUP's have a wood/hollow core?

I've ridden them a few times, always thought it was solid foam.

  • Author

Most paddle boards you see out there are solid foam wrapped with fiberglass. Final weight of my board is 35.2 lbs. more pictures to follow.

Sent from my iPhone using Tapatalk

  • Author

Fiberglassing the exterior:

Bottom:

66493cee30b3f06994f15ad7551fb82c.jpg

Top - adding some decorative cloth underneath the fiberglass. The key thing is to ensure that the fabric is completely wetted with epoxy before laying down the fiberglass on top of it.

3c19af73853d144a4424a4574c0cb709.jpg

1297078f990432a4e88d5a14a52d9846.jpg

Sent from my iPhone using Tapatalk

  • Author

Installing the fins. They are butt jointed to the bottom and held in place with epoxy and additional fillets of epoxy/wood dust.

47d50ad06d881a94ed78cf0e8a629727.jpg

16d5a1b9dc6c5a2e0f36814412981938.jpg

Fillets not shown, but they add a bead of about 1/4" to the joints.

Sent from my iPhone using Tapatalk

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.