Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

The Redcoats are coming...The Redcoats are coming!!!

Featured Replies

  • Popular Post

Not... but my air condition and heating installer is coming tomorrow morning!!! Sorry, I know it's insignificant to most, but I've only been waiting a year to say that. 19,000 btu's of greatness...I plan to make my shop feel like an ice rink tomorrow night.

Not... but my air condition and heating installer is coming tomorrow morning!!! Sorry, I know it's insignificant to most, but I've only been waiting a year to say that. 19,000 btu's of greatness...I plan to make my shop feel like an ice rink tomorrow night.

   Okay, you had me worried for a minute.... You need to relax and just "cool" it tomorrow!

Not... but my air condition and heating installer is coming tomorrow morning!!! Sorry, I know it's insignificant to most, but I've only been waiting a year to say that. 19,000 btu's of greatness...I plan to make my shop feel like an ice rink tomorrow night.

 

What kind of unit are you putting in? Mini split?

 

Air conditioning in the shop is a wonderful wonderful thing. I haven't turned mine off in a few days. I raise the temp when I leave and have it set to 73 at night. Compressor kicks on when it gets too warm and brings it back to the temp I have it set to. When I get home I lower it to 68 and within 30ish minutes it's nice and cool in the shop. I still sweat like crazy when I'm milling wood or doing any hand tool operations. Such is the nature of being Italian.

 

Enjoy the cooling in the shop =) 

Congrats on the coolness 

 

19,000 BTU, how big is your shop? Been doing the math trying to figure what would get me close. 

I put a 50# block of ice in front of my box fan and it stays nice. But I play hell getting the mc of my wood below 50%.

  • Author

Just got done with the install and it's working great!

I put a mini split with a heat pump in. It's a 2 ton condenser and I have a 9k btu head in my finishing/utility room which is 12x24 and a 19k btu head in the shop which is 24x24.

I went with Daiken and the whole system including line sets and comunication wire was about $3,200.

Hey janello, what brand did you go with on the mini splits? Sounds like you went with a single condenser? I've been pricing these and I'm leaning toward the Mitsubishi.

Sent from my iPhone using Tapatalk

  • Author

Yes, single condenser. See above I edited my post. Mitsubishi makes a good system. I have a 2 head mitsu in my basement (no heat pump) and it works well. I put a Daiken in my daughters bedroom about a year ago and it has also been working great. I went with Daiken because the quality is as good as the mitsu as far as I can tell, but get them cheaper because I know a supplier who gives me a decent discount. I'm happy with both, they are both whisper quiet in and outdoors.

Ah cool! ;) So you installed yourself? Daiken is also on the short list for me... good stuff from what I can tell.

  • Author

Ah cool! ;) So you installed yourself? Daiken is also on the short list for me... good stuff from what I can tell.

No, I was pretty much the B-boy helper. The plumbing and electrical part of it I understand. The HVAC vacuum pump, purging, and charging the system part is above my pay grade. A co-worker did all that for me.

You completely lost my interest when you mentioned the size of your shop and the fact that it now has conditioned air

No, I was pretty much the B-boy helper. The plumbing and electrical part of it I understand. The HVAC vacuum pump, purging, and charging the system part is above my pay grade. A co-worker did all that for me.

Yeah, that is the same idea that I had. The installation looks very straight forward. I know my HVAC guy can and will charge and purge for me,; but I'm wondering about a valid warranty if I purchase the system myself. Did you happen to run across any info in that regard? Sorry to be a question factory. [emoji6]

Sent from my iPhone using Tapatalk

  • Author

Happy to help if I can Gary. I'm not sure if I can give you much advise on this topic, as I am one of those type that usually worries about a warranty when there is a problem!  :o  I also have the advantage of not worrying too much because I work for a large mechanical contractor that has a ton of pull with the supply chains. However, I did have an ant farm infest my Mitsubishi unit a few years ago, so much so that the board inside shorted. The unit was less than a year old at the time and with a few white lies and pursuasion by our purchasing department, I got the board swapped under warranty. 

 

Assuming your HVAC mechanic knows not to leave any moisture in the system (that's bad mojo for compressors that use 410a) or unless something odd like ants make it a home, these are very trouble free and reliable units. Since that happened to me I put ant stakes a few feet around the perimeter of the condensers.

  • Author

I will share a few installation tips with you that may save you some aggravation. When you come through your wall with the drain line, bush it down to 1/2" in the wall before you come through. 3/4" PVC and 2 refrigerant lines are tough to jam into the small channel they give you for hook-ups. I found that out the hard way.

 

Also if you can get your hands on one, this thing is a great help! One person can do all the hook-ups then hang it on the top of the wall plate , remove the yellow mighty bracket and snap it down.

 

Mighty Bracket =====>  http://www.rectorseal.com/wp-content/uploads/2015/01/MBYOM-with1sock-duovh.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.