Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

The joys of a basement workshop... water proof bench?

Featured Replies

When my wife and I bought our house we knew that the basement takes on water from time to time. About once a month we seem to get a lot of rain and I get three large but shallow puddles. I am working on the drainage issues but I doubt we will ever be totally dry.

We actually looked at it as a positive. Expect water from time to time. Don't expect to ever be tempted to make it living space and don't feel guilty making it a dedicated shop.

I spent the last few days cleaning and rearranging in anticipation of building a new workbench.

Came down today and a few of my jigs were sitting in a puddle.

It got men thinking about my upcoming bench.

I try and keep everything elevated enough so that the water doesn't do any damage. But the bench won't be able to be elevated.

The place I anticipate putting it will get a little water from time to time.

I was planning on building the woodsmith shop bench. It calls for Mdf to strengthen the sides of the legs. I know I don't want water ever touching that Mdf. I have seen what Mdf does when it gets wet.

I was planning on not extending the Mdf all the way to the floor.

But now I am worried about the legs being in the water. I was planning on them being made of southern yellow pine.

Granted. It is never very much water. Never for more than a few day before it dries up.

Should I be thinking something other than syp?

Am I over thinking it?

post-1863-0-72228000-1291151291_thumb.jp

  • Author

Huh... never thought of that.

This is why I LOVE this forum!! The only options I could think of were making them out of metal... which I didn't want to do for a myriad of reasons. Most importantly I can't weld. Or to just sit the whole thing on top of bricks or something. I could see the bench sliding off and hurting it or myself.

I just couldn't come up with a better third idea.

Thanks!

Anyone else?

Have you thought about making it and either setting it on something like a paver block or a dense hardwood or making the very bottom of the legs with a pad that you can pop off and replace when needed? Just a thought.

Nate

could set the legs in coffee cans or small plastic tubs, if the bench is heavy enough, shouldn't move much...hot glue the cans to the floor may even help.

just throwing out ideas...

Tell the Mrs it would be more beneficial, if you just built a dedicated workshop on the back forty ;)

Ok, here's an idea. Remember that stuff you can dip your tools into to put a rubber coating on? well, they make a spray also.

How about glueing on a piece of rubber on the bottom of each leg (for abrasion resistence to the floor) and then spraying the first couple inches of the leg bottoms with the spray-on rubber/plastic/whatever it is. It even comes in different colors. You could have red tipped legs :-)

Or make it out of wood like you normally would then waterproof the bottom 6-8" of each leg. Two coats of CPES is considered waterproof. Since they use it to repair rotted transoms pummeled with salt water on boats, it likely can handle a puddle or two. It's expensive, but you don't need very much at all.

Here's a link to the cold-formula CPES. It has more catalysts to make it set in cold (really cold) weather. Apply it to the legs outside because you ain't seen no VOCs like CPES VOCs. I personally think the water is just plain scared of the VOCs. I use the stuff on vanity tops. It actually looks very nice once you sand it back; varnish it to match the rest of your bench if you want to set a sheen.

I would coat the legs with spar polyurethane (can get it any Borg), and then to make sure it doesn't get abraded by the floor, sit it on rubber, or something. Another option would be to coat the bottom inch or two of the legs with epoxy.

How about poured concrete footers with a Simpson standoff post base to attach the posts. It's easy to cast concrete into any shape you like, and in this case, you should be able to come up with a shape that doesn't look too bad. Mix in some color, and it could be a cool design element. It's cheap, and the weight will work to your advantage on a bench. The Simpson post bases will keep the wood from contacting the concrete directly, which could be an issue for moisture.

You could make the legs from cypress, or teak, too.

Put a couple of blocks where the water goes, and line it with something that will mark the water line. This will tell you how high the water goes, so you know how much water resistance you need. You may discover it's only three inches, in which case I'd recommend putting your workbench on locking casters.

I recommend cutting channels in a few strategic places in the floor, and then install a sump and a sump pump. The channels could be covered with grate or plate.

Could always just use pressure treated lumber for the legs or just make leg bottoms from it, get the stuff rated for ground contact it sits on wet dirty 24/7 and lasts a long time sitting in water on occasion they will probably out live the bench.

  • Author

WOW!!

A lot of really great ideas here guys.

Right now I gotta say Paul Nunya is in the lead. I can't believe I didn't think of that!!! Thank you Paul. The answer was so obvious!

Honorable mentions include Beechwood Chip (still might go with the trex), Don Trust, of course Paul-Marcel, and Dan S.

The only reason I am weary of the concrete stuff is that I'd like to be able to push the bench around if I had to and I worry about concrete blocks and concrete footers making that difficult or breaking.

Onboard, we have a sump and pump already. We are talking about 1/4" of water. One of the reasons we bought this house was after the big Nashville flood it only got 10" of water... no damage. That's with the electricity off, i.e. sump pump not on. Sounds silly but after what some of our friends went through it is nice to know that 10" is a worst case scenario.

So I am definetly going to make the "water resistant" aspect of the bench the bottom foot to be safe.

A.J., I think I am going to have some sort of a caster setup. I thinking of using Norm's fold down caster rig and just put it up on the casters when I wasn't using it. I am just wanting the bottom foot to be water resistant as insurance.

Thanks for all the help guys!

The problem with the drainage holes may be that the water may get on the table before you can get it into the drains.

How about something like this. For non sketchup users there are images and for sketchup users there are plans. The base is steel and the leg is wood. No welding involved! Now I'm going to fix my welder, I wish I got a stick welder as apposed to a mig!

post-1694-0-98055900-1291192749_thumb.pn

post-1694-0-60603400-1291192757_thumb.pn

post-1694-0-66826800-1291192765_thumb.pn

drawing.skp

How about a spray can of truck bed liner. It is skid resistant and waterproof to boot.

Shawn

Looks like we covered every possible remedy this side of Pluto except: just use Locust for the legs.

Not a problem Ben glad I could help. I always try and keep it simple and cheap so many problems in life are complicated but the solution rarely is.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.