zeboim Posted August 12, 2015 Report Posted August 12, 2015 Hi everyone, I picked up a cabinet saw on craigslist a couple weeks ago. It was all assembled, but never used and had a few extra bits, such as a sanding disc blade, throat plates, wrench, etc. There was also this thing. I have no clue what it is and I didn't see it in the user manual. Does this go to my saw or was this just in there by mistake? It kind of looks like the black brace would slide down the rod, but it doesn't budge or spin. The other end of the rod is threaded. Quote
Trip Posted August 12, 2015 Report Posted August 12, 2015 At a guess, it’s part of the blade guard assembly... If the saw didn't have the blade guard installed when you took deivery, then my guess looks a bit better 1 Quote
zeboim Posted August 12, 2015 Author Report Posted August 12, 2015 The saw did not come with a blade guard, so that certainly could be it. Quote
Mick S Posted August 12, 2015 Report Posted August 12, 2015 That's what it is. It attaches the blade guard splitter assembly to the body of the saw. Quote
zeboim Posted August 12, 2015 Author Report Posted August 12, 2015 That's what it is. It attaches the blade guard splitter assembly to the body of the saw. That's the one. Thank you. Quote
Tom Cancelleri Posted August 13, 2015 Report Posted August 13, 2015 Yep, that's the blade guard assembly piece that hooks to the trunion and the post rides out the back of the saw in the little arch. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.