Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Shop Vacuum System

Featured Replies

I have been putting together a dust collection system in my small workshop. I have a excess of shop type vacuums so I deiced to use two of them for my system. They are connected by a "Y" type PVC connector to my system. I took two 5 gallon buckets and put them together to make one unit. I have a Thien baffle in the upper part of the unit. One of the vacuums has more suction than the other. My question is, am I getting any benefit from having two vacuums or is the one with more suction some how diminishing the weaker one?

I'm no expert on fluid machanics, but my gut tells me that two are better than one, but maybe not as good as two individuals. Check out stumpynubs.com, he did a dual dust collector test a couple years ago, with a similar configuration. As I recall, the world failed to end, contrary to many predictions.

I'm also not an expert on fluid dynamics, but I have run into something similar quite a bit. It's not uncommon to configure CNC routers with multiple (identical) vacuum pumps for hold down so that when additional flow is needed, a second or third pump can kick in. You'll gain CFM and the higher flow helps to maintain pressure that otherwise would be lost to leakage.

I would shy away from doing it with shop vacs if there's a big difference in the pressure the two systems produce. I suspect that the lower pressure unit would put too much drag on the other and wear it out prematurely.

x3 not an expert on fluid dynamics...won't take a guess on any of that.

But I wouldn't waste my time and money setting up a ducted system with shop vacs.  Get a real DC, 2HP or bigger, then start creating your system with 4" pipe.  Unless you only have small tools, the shop vacs will prove insufficient at some point.

  • Author

Thanks for your comments. Right now I can not afford to upgrade my system as was suggested. I only am using small power tools and my system seems to doing a good job. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.