SawDustB Posted December 27, 2015 Report Posted December 27, 2015 I thought I'd show off the photo stands I made my wife for Christmas (among other things). They're based on the "trendy bendy photo stand" video on the woodworking for mere mortals YouTube channel. From outside to inside, I used red birch, jatoba, canary wood, and maple. I made up a blank about 3 inches wide. I had to resaw the boards to get down to 1/4 inch, which I did (very carefully and with feather boards and push sticks) on the table saw. Once they were planed to thickness, I glued up the blank using about a cup of glue. I then cleaned up the blank and hot glued it to a larger board, then proceeded to rip off strips about 1/16 thick (on the outside of the blade, by setting a stop). My bending form was one sided, made from some scrap cedar on the scroll saw. I then glued up the stands and vacuum clamped them using a food saver vacuum packer. This actually worked remarkably well, although I would recommend using tape as well to get the strips in roughly the right place. Lots of sanding and some spray lacquer later, and here we are. 2 Quote
..Kev Posted December 27, 2015 Report Posted December 27, 2015 I missed his video on that one, had to go watch. Pretty cool! Quote
prov163 Posted December 27, 2015 Report Posted December 27, 2015 Very nice work! Great color choices. Quote
mat60 Posted December 27, 2015 Report Posted December 27, 2015 Gerat work Sawdust..Bet wife is happy. Quote
SawDustB Posted December 27, 2015 Author Report Posted December 27, 2015 Thanks guys. My wife was thrilled, although she asked why I made her three (seemed a shame not to squeeze as many as I could out of the blank). This was a good project if you had a couple of hours in the shop over a day or two (and for using up some exotic scraps). 1 Quote
shaneymack Posted December 27, 2015 Report Posted December 27, 2015 Looks really nice. Im kinda ignorant as how they work. Is that the finished product? Is it three different stands? Sent from my SGH-I337M using Tapatalk Quote
SawDustB Posted December 27, 2015 Author Report Posted December 27, 2015 Looks really nice. Im kinda ignorant as how they work. Is that the finished product? Is it three different stands? Sent from my SGH-I337M using Tapatalk Yeah, that's three finished stands. They sit on a table and if you look closely there's a slot in the top to put a picture in (created by making the middle piece in the lamination about 3/4 shorter). Quote
shaneymack Posted December 27, 2015 Report Posted December 27, 2015 Looks really nice. Im kinda ignorant as how they work. Is that the finished product? Is it three different stands? Sent from my SGH-I337M using Tapatalk Yeah, that's three finished stands. They sit on a table and if you look closely there's a slot in the top to put a picture in (created by making the middle piece in the lamination about 3/4 shorter). Ahhhh i see. So it is meant to hold a photo with no frame. I get it now. Great job, they are very nice! Sent from my SGH-I337M using Tapatalk Quote
Popular Post SawDustB Posted December 28, 2015 Author Popular Post Report Posted December 28, 2015 This is the intended use: 4 Quote
wtnhighlander Posted December 28, 2015 Report Posted December 28, 2015 Nice job! Good color choices, too. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.