Recommended Posts

Posted

They talked about these on a recent WTO.  Shannon was saying he prefers the Veritas model because the design is more versatile....can get in tighter spots and what-not.  I was considering getting one even though I don't have the need for scratch stock very often.  Maybe I would if I owned one. :)

It's been in my LV cart for months.

http://www.leevalley.com/US/wood/page.aspx?p=62030&cat=1,41182,62030

05p0450s1.jpg

 

Another option...

http://www.leevalley.com/US/wood/page.aspx?p=32679&cat=1,230,41182

Veritas® Wooden Beading Tool - Woodworking

  • Like 1
Posted

==>Does it work well on hardwoods?

Depends on how you define hard...

Mostly cut beading on period pieces... Most of these, I execute in tight-grained Genuine Mahogany... The material is very cooperative... I've also beaded some straight-grained rift Hard Maple... That's about the limit of my experience... Note: with beading, the straighter and tighter the grain, the better...

I own the LN product. I also use Hack's scratch stock, and a small collection of beading planes... I have an extensive collection of beading bits for the router table, but don't use them much anymore...

I've never used the Veritas product...

To be honest, I'm not sure how 'flexible' a beading tool needs to be... In the forms that I execute, a simple tool is AOK. Actually, the simpler the better... For forms that I don't have experience with, maybe a more flexible tool would work better... Don't know.

Both LN and Veritas are pretty good about returning tools that are a bad fit for you... I'm pretty sure you can't go too far wrong with either companies' products...

Good luck.

 

  • Like 1
Posted

 

29 minutes ago, hhh said:

Both LN and Veritas are pretty good about returning tools that are a bad fit for you... I'm pretty sure you can't go too far wrong with either companies' products...

Yes, LN's customer support and return policies are impeccable. As a matter of fact, I have a $250 credit from a previous order which I want to spend ASAP :D 

Posted
37 minutes ago, Gilgaron said:

I have the first one Eric lists, and I saw the other day that Lee Valley also has this one now:

http://www.leevalley.com/US/wood/page.aspx?p=73766&cat=51&ap=2

I'm not sure why they have three different tools that do the same thing, but I suppose one of them is bound to suit you.  It is cheaper than the other two. 

It is indeed cheap. It's not a Veritas tool like the other one, I guess that explains it. I don't think those handles would do for me. I have big hands.

Posted
23 hours ago, Gilgaron said:

I have the first one Eric lists, and I saw the other day that Lee Valley also has this one now:

http://www.leevalley.com/US/wood/page.aspx?p=73766&cat=51&ap=2

I'm not sure why they have three different tools that do the same thing, but I suppose one of them is bound to suit you.  It is cheaper than the other two. 

I have that one- couldn't pass it up at that price.  I haven't actually used it on a project yet, but it works great on some scrap cherry.

Posted

The only thing I've ever bought from LN is the replacement cutters for this beader.  I bought an old Stanley really cheap without any cutters.  We made some reeded mantles for an early 19th Century house.  I also bought one of the wooden LV beaders (like the lower picture in Eric's post)  because it allows a farther reach from the fence than these.  LN cutters are a harder metal, probably A2.  LV cutters are softer, probably 01.  We were using Heart Pine, and Poplar.  I could get the LV cutters sharper, which we liked better. 

We were using them for hours at the time, and the wooden one was everyone's favorite. 

Beading or reeding is not hard to do, just don't try to force it.  Just like with a plane iron or chisel, sharper is better. 

I did try them on Walnut, because those clients want me to make a reeded Walnut mantle, and it cut as easy as the Poplar, which was for a painted one.

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 56 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined