Recommended Posts

Posted

Rather than looking for suggestions on what I need, I am looking for opinions on this table saw.  I will be buying a table saw to replace a very old craftsman.  I have come across this model and would like to know more about it.  Thanks

Posted

This really is a question that needs context. Do you want a contractor saw? As far as contractor saws, this is larger surface area and heavier than most. If you are going to push it hard you might find 1.75 horse wanting at times. 

Posted

are you looking new or used? brand new a PM1000 is not much more money and offers the benefits of a cabinet style saw. Adjusting the blade to be parallel to the miter slots is a major PITA on contractor saws and relatively simple on cabinet saws. Also keep in mind that powermatic has a 15% sale a couple times a year.

Sent from my iPhone using Tapatalk

Posted

I have the 64A - artisan saw.  I've used it for about 25 years now and it runs as good as the day I bought it. Yes its a bear to align, I've had to do that twice in all these years. Never used a 64B but I would expect it to be a good saw.

 

dw

 

  • Like 1
Posted

If you are going to spend that kind of money it really doesn't make sense to buy a contractor saw. There are cabinet saws at the same price point and ones made by powermatic for just a little bit more. The heavier construction on the internals make a difference in the precision you can ultimately get out of the machine. Will it cut wood? You bet, no issues there. But its nice to have to set it up once and know you can come back and get the same cut over and over etc. You can see a manual of the 64B here and a manual of the PM1000 which is 400 more here. Annoyingly they don't provide many pictures of the internals but they do provide an exploded diagram. You will note that they are VERY different in nature. The 64B has a single large casting inside the machine that lets a small casting that holds one side of the arbor ride up and down. This is the system they use to keep their riving knife at the same height as the blade. The PM1000 uses multiple large castings to suspend the moving parts inside the cabinet. 

And for 75 dollars more then the 64B you can buy a grizzly cabinet saw with a 3hp motor, riving knife, with internals that are a clone of the old style unisaw. Just saying....

  • Like 1
Posted
1 hour ago, Chestnut said:

Cabinet saws are not necessarily bigger either sometimes their footprint can even be a bit smaller. Also mobile bases make them easy to move around a shop.

I appreciate the responses.  It sounds like there doesn't really seem to be any advantage to the 64B.  My shop space (garage) is small.  So, I have to wheel (two man carry at this point) my equipment around to do projects.  I only have 110 at this time but looking to resolve that in the future.  However, I must assume for my purchase that I might not be able take care of that.  I was leaning toward the 64B or the PM1000.  I need them both to be mobile and work with what I have power wise.  I know that there are good deals on craigslist, etc., but I would like to buy new.  At this point, it appears to me that I will be saving for the PM1000. 

Posted
6 minutes ago, billiam62 said:

I appreciate the responses.  It sounds like there doesn't really seem to be any advantage to the 64B.  My shop space (garage) is small.  So, I have to wheel (two man carry at this point) my equipment around to do projects.  I only have 110 at this time but looking to resolve that in the future.  However, I must assume for my purchase that I might not be able take care of that.  I was leaning toward the 64B or the PM1000.  I need them both to be mobile and work with what I have power wise.  I know that there are good deals on craigslist, etc., but I would like to buy new.  At this point, it appears to me that I will be saving for the PM1000. 

I think that is the right decision.   And like I said, wait for the next 15% off sale.  They usually do one on the spring.  

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   3 Members, 0 Anonymous, 67 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined