Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

grain filling recommendations

Featured Replies

for a Red OAK end table top, looking to fill the pores more than just a top coat would normally, not looking for piano finish but not hills and valleys either. thank you in advance for your input.

  • Author

i have used timbermate as a small imperfection filler but not on a whole top.. with it needing to be stained and toned to get right color what would your recommendation be for proper procedure? take a quart of this and thin it down a lot to spread over the top?

Someone else will have to advise on the Timbermate.

As for the plaster of paris, I mixed it per the package instructions, along with black dye. It made about a pint of paste, but I used less than half to fill two round table tops, 24" diameter. Lay it on and spread it over the surface, the scrape off the excess, dragging the putty knife diagonal to the grain, similar to grouting tile. Work quickly, as it dries fast. Be prepared for a good deal of sanding, especially if you don't scrape quickly enough!

I used black dye to highlight the grain, you may prefer less contrast. I finished with boiled linseed oil, and it worked well. I read that the oil makes un-colored plaster somewhat translucent, but I haven't tried it.

Barely thinned Timbermate works to fill red oak. But that stuff smells funny. Odor hangs around the shop for the next day or so.

Add water carefully and stir it in well. Use an eye dropper to add water, you can't pour the tiny amount needed easily. Too much water and the filler shrinks requiring multiple applications to fill the grain .

  • Author

what would be your preference for filler wdwerker, if you dont like timbermate?

Ive never used timbermate as a pore filler but there are many who do. Some luthiers thin it slightly with water until its the consistency of toothpaste and then smear it over the entire surface. If u get a good color match it looks great.

.

Perhaps try samples by mixing different colors. Ive done small gaps in mahogany by mixing walnut mahogany and maple and it worked well. But be sure to sample it with your intended finish, a perfect match while dry may change dramatically when finished.

Sent from my SAMSUNG-SM-G890A using Tapatalk

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.