treeslayer Posted March 12, 2016 Report Posted March 12, 2016 my son called me today and said his 10" delta direct drive TS was shooting sparks out of the motor, i assume it's the brushes are worn out and the metal is hitting the armature, he got a price on another motor but the price is almost $400.00. my question for this great group is the thing dead in the water? can the brushes be replaced by operator or a pro? he's already looking for another saw (used) but like all of us starting out funds are limited, he's in milwaukee not that it matters. thanks for the help guys Quote
wdwerker Posted March 12, 2016 Report Posted March 12, 2016 I wouldn't spend good money on a direct drive tablesaw. I had one when I was a teen and wore it out pretty quickly. If the brushes are gone I would think the bearings may be worn as well. I have no experience with the Delta saw but their reputation these days isn't stellar. Quote
treeslayer Posted March 12, 2016 Author Report Posted March 12, 2016 thanks for the quick reply steve, i was thinking the same thing. i found the saw he has it was used from a friend of mine for not much money but it had a long bisemeyer fence on it so maybe he can rotate it out and find another saw that will last him for a while, new one i hope, thanks Quote
wdwerker Posted March 12, 2016 Report Posted March 12, 2016 The fence might be salvageable. Not sure if it will fit a better saw but maybe a little research will tell you. 1 Quote
Brendon_t Posted March 12, 2016 Report Posted March 12, 2016 Delta has a 16" bolt pattern. Many saws I have seen do also. I had a direct drive ts that started sparking. Took the mirror apart and forms not only were the brushes about done, the armature was also un winding. I trashed it. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.