davewyo Posted March 29, 2016 Report Posted March 29, 2016 I had an idea today while putting my miter sled onto my table saw. From the previous task I had an after-market insert plate with a micro-jig splitter installed and I pulled it off to install the sled on the table. Automatically I reached for the saw's standard insert which is super wide so you can tilt the blade, and then I wondered why I was bothering. The dust collection from under the table would probably work better without an insert, and it would presumably be safe to run the saw without an insert in place(especially if you have a sled on the table). If I'm using a shopmade sled is there any reason I should put an insert into my table saw? Something obvious I'm not seeing? Quote
davewyo Posted March 29, 2016 Author Report Posted March 29, 2016 Thanks! That just cut a step out of the process. I don't know why I've been bothering. It's like I was so focused in on keeping the hotdogs attached that it never occurred to me that I was broken. For years I've just automatically pulled the zero clearance insert, pulled the riving knife or whatever, and put the wide clearance insert in before I plop my sled down. No reason...just because that's what I did. Quote
AceHoleInOne Posted March 29, 2016 Report Posted March 29, 2016 Man.....use a throat plate. That gives me chills just thinking about it. Do you get a lot of sawdust built up between the table and sled when pushing it through? -Ace- Quote
gee-dub Posted March 29, 2016 Report Posted March 29, 2016 I also find the dust collection better with the throat plate left out when using a sled. This is perfectly safe as you never have your hands near the blade area at all when using a sled. If you do have your hands near the "driller's end" consider t-track and hold downs or clamping to the fence. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.