Recommended Posts

Posted

I just got done setting the knives in my 12" jointer, and I noticed my new knives had a slight bow in the over the 12". I hadnt noticed this on previous knife settings because I didnt have a oneway. Hard to notice a 2-3 thousandths arc in the knife when using a straight edge and how far it moves when rotating the cutterhead. Anyways, it got me thinking what is an acceptable tolerance for jointer/planer knives? Here I am setting my knives dead on with the oneway dial indicator jig, and my knives arent perfect. Made me wonder why I am jerking around with a $100 jig and 45-60 mins of my time to set these all within .001-.002" of the table when 2 of the 3 knives had a 3 thousandths deviation over the length of the knife. Ultimately this wont matter much, but what standards are sharpeners/manufacturers typically held to? Will be something to think about when I send the other set off to be sharpened.

Posted

.003 bow is not acceptable for me.  I and that problem once. I did not get any satisfaction from the sharpening shop so I took my business elsewhere. 

Posted

Ok, I didn't know if I was being crazy or not. After all, a starrett straight edge is only guaranteed to .001 over 12", and im expecting THREE blades to be that for less cost.

 

Who is a respected sharpener that has the proper setup to sharpen blades to such tolerances? I imagine the setup needs to be fairly sophisticated to pull off this precision.

Posted

Sophisticated isn't the answer. Properly engineered is what you want. Express your tolerance and tell them you will pay when it meets it. They will tell you up front what their equipment can do. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   0 Members, 0 Anonymous, 47 Guests (See full list)

    • There are no registered users currently online
  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined