Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Bass build, with mistakes

Featured Replies

  • Popular Post

Most of you know I am building one of these things.. So, I figure it's best to put the pics on one place.

Since I started playing again, I decided to resurrect this thing. It is not so loosely based on a Ritter Roya, and the wood is cherry.

Pickup layout:

13639641_10210149226995335_1025302874_o_

Rough routed. Pots located, holes drilled:

13646667_10210149226915333_2129690639_o_

 

More freaking layout:

13633402_10210149227035336_1373998156_o_

 

I made some templates for this. And the first mistake should be obvious. It's an easy fix, so not worried about it:

13692297_10210199630535392_1044961292_o_

A la Ritter. I will be making a wooden cavity cover for this:

13709570_10210203249425862_230312290_o_z

Mistake!!! Due to my desire to sculpt the sides more than Ritter does, this is what happened. Little blow out. I have a fix in mind, again not worried about it.

13711464_10210199630295386_1641823988_o_

Cool Mel! Looking forward to this. I love Ritter's stuff and admire the fact that his instruments are true art pieces.

Mel, did you just start this project or was it something you put on hold?  Either way, it looks like you are off to a great start.  I really like the bodies shape.  

One thing I never really understood when it came to basses like that is the top horn. The grain direction leaves it more susceptible to breaking, especially with the addition of a strap mounting there. My thoughts would be to drill a 3/8" hole down the horn towards the body (in the center of course), some glue and a cherry dowel, and then cover the dowel the the strap button. 

  • Author
15 minutes ago, Woodenskye said:

put on hold

This one... I shaped the body several years ago, and it just sat on the shelf. 

8 minutes ago, Tom Cancelleri said:

top horn

Haven't seen any break at that point unless they really get banged. The wood is right around 1.75" (44.45mm for the Canadian), so I'm really not concerned with that being an issue.

3 hours ago, Gary said:

Looking forward to this.

thanks :) Me too lol... It's been a long time in the making!

2 hours ago, Llama said:

Haven't seen any break at that point unless they really get banged. The wood is right around 1.75" (44.45mm for the Canadian), so I'm really not concerned with that being an issue.

If you're not breaking the top horn, you're not rocking hard enough! B)

6 hours ago, Llama said:

Most of you know I am building one of these things.. So, I figure it's best to put the pics on one place.

Since I started playing again, I decided to resurrect this thing. It is not so loosely based on a Ritter Roya, and the wood is cherry.

Pickup layout:

13639641_10210149226995335_1025302874_o_

Rough routed. Pots located, holes drilled:

13646667_10210149226915333_2129690639_o_

 

More freaking layout:

13633402_10210149227035336_1373998156_o_

 

I made some templates for this. And the first mistake should be obvious. It's an easy fix, so not worried about it:

13692297_10210199630535392_1044961292_o_

A la Ritter. I will be making a wooden cavity cover for this:

13709570_10210203249425862_230312290_o_z

Mistake!!! Due to my desire to sculpt the sides more than Ritter does, this is what happened. Little blow out. I have a fix in mind, again not worried about it.

13711464_10210199630295386_1641823988_o_

Cool! Another musical instrument thread. I love the jigging, templating and the clamping strategies youze guys get up to when you make these things.

While the second mistake is glaringly obvious, and it will be interesting to see the fix you have in mind, I don't see the first mistake. Of course I don't know what you should be doing so it's difficult to know when you do something "off".

Do tell...

  • Author
55 minutes ago, davewyo said:

Do tell...

Due to the layout of the control cavity, I had to route into where one of the pickups mount. I'll have to add a piece of wood there for the screw to attach.

 

Oh! I see!
 That little round spot you marked out during the "more freakin' layout" part. ;)

Good to see you going on this again Mel!  

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.